




Machining centre Hermle UWF 902H
Technical specification
| Category | Machining centres |
| Make | HERMLE |
| Condition | Used |
| Location | Spain |
Description
Universal CNC milling machine Hermle UWF 902 H
Universal CNC milling machine from Hermle (Germany), built in 1996, with a Heidenhain TNC 426 control and a 34-tool changer. It is a widely used machine for tooling, moulds and one-off or short-run precision parts.
The Hermle UWF series combines a horizontal and a vertical spindle on a rigid cast-iron structure. According to the manufacturer's documentation for the UWF 902 H, the spindle is driven by an 8.6 kW motor with stepless speed control from 20 to 6,300 rpm in three ranges, with direct measuring in X, Y and Z. The Heidenhain TNC 426 is a conversational control well known in mould shops.
Configuration of this unit
Model: Hermle UWF 902 H
Control: Heidenhain TNC 426
Travels: X 600 mm; Y 450 mm; Z 500 mm
Table: 900 x 520 mm
Taper: ISO 40 DIN 2079
Spindle speed: up to 6,300 rpm
Tool changer: 34 positions
Year: 1996
Overall dimensions: 2,950 x 2,200 x 2,300 mm; weight: 4,900 kg
Typical applications
Tooling, electrodes, mould plates, precision prismatic parts and prototypes, in die-making, general machining and industrial maintenance shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Universal CNC milling machine from Hermle (Germany), built in 1996, with a Heidenhain TNC 426 control and a 34-tool changer. It is a widely used machine for tooling, moulds and one-off or short-run precision parts.
The Hermle UWF series combines a horizontal and a vertical spindle on a rigid cast-iron structure. According to the manufacturer's documentation for the UWF 902 H, the spindle is driven by an 8.6 kW motor with stepless speed control from 20 to 6,300 rpm in three ranges, with direct measuring in X, Y and Z. The Heidenhain TNC 426 is a conversational control well known in mould shops.
Configuration of this unit
Model: Hermle UWF 902 H
Control: Heidenhain TNC 426
Travels: X 600 mm; Y 450 mm; Z 500 mm
Table: 900 x 520 mm
Taper: ISO 40 DIN 2079
Spindle speed: up to 6,300 rpm
Tool changer: 34 positions
Year: 1996
Overall dimensions: 2,950 x 2,200 x 2,300 mm; weight: 4,900 kg
Typical applications
Tooling, electrodes, mould plates, precision prismatic parts and prototypes, in die-making, general machining and industrial maintenance shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/machining-centre-hermle-uwf-902h
