


Machining centre First V-43 MFG
Technical specification
| Category | Machining centres |
| Make | FIRST |
| Condition | Used |
| Location | Spain |
Description
First V-43 vertical machining centre
The First V-43 is a vertical machining centre from the Taiwanese manufacturer First, with a 1,300 x 600 mm table and travels of 1,100 x 600 x 510 mm. It is built for medium-sized parts in aluminium and steel, and for mould work.
Model and control features
Listings for other V-43 units describe travels of 1,100 x 600 x 500 mm and a tool magazine; these are model data, not confirmed here. On this unit, the console carries a Siemens Sinumerik control, marked on the keyboard and screen.
Configuration of this unit
Control: Siemens Sinumerik
Table: 1,300 x 600 mm
X, Y, Z travels: 1,100 x 600 x 510 mm
Spindle taper: BT 40
Spindle speed: 15,000 rpm
Tool changer: 24 positions
Swarf conveyor: yes; conveyor with bin visible in photo
Portable electronic handwheel, visible in photo
Year: 2008
Overall dimensions: 4,390 x 2,250 x 2,920 mm
Typical applications
High-speed milling of aluminium and steel, mould and tool machining, and short to medium batch production in subcontract machine shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The First V-43 is a vertical machining centre from the Taiwanese manufacturer First, with a 1,300 x 600 mm table and travels of 1,100 x 600 x 510 mm. It is built for medium-sized parts in aluminium and steel, and for mould work.
Model and control features
Listings for other V-43 units describe travels of 1,100 x 600 x 500 mm and a tool magazine; these are model data, not confirmed here. On this unit, the console carries a Siemens Sinumerik control, marked on the keyboard and screen.
Configuration of this unit
Control: Siemens Sinumerik
Table: 1,300 x 600 mm
X, Y, Z travels: 1,100 x 600 x 510 mm
Spindle taper: BT 40
Spindle speed: 15,000 rpm
Tool changer: 24 positions
Swarf conveyor: yes; conveyor with bin visible in photo
Portable electronic handwheel, visible in photo
Year: 2008
Overall dimensions: 4,390 x 2,250 x 2,920 mm
Typical applications
High-speed milling of aluminium and steel, mould and tool machining, and short to medium batch production in subcontract machine shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/machining-centre-first-v-43-mfg
