


Machining centre Deckel DMU80T
Technical specification
| Category | Machining centres |
| Make | DECKEL |
| Condition | Used |
| Location | Spain |
Description
Deckel Maho DMU 80 T machining centre
The DMU 80 T is a Deckel Maho universal machining centre with travels of 880 x 630 x 630 mm. It is designed for medium-sized parts requiring several operations per set-up, in toolmaking, mouldmaking and precision engineering.
Model and control features
According to listings for other DMU 80 T units, the model is equipped with a Heidenhain iTNC 530 control, SK 40 taper, a 32-tool magazine and spindle speeds of up to 10,000 rpm; these are model data, not confirmed here. In the photos of this unit, the console shows a control with Heidenhain-style conversational programming.
Configuration of this unit
Model marked on the front: DMU 80 T Deckel Maho
X, Y, Z travels: 880 x 630 x 630 mm
Spindle speed: 8,000 rpm
Year: 2001
Weight: 9,000 kg
Vice on the table and extraction hose, visible in photos
Typical applications
Machining of moulds, tooling and precision engineering parts, with milling, drilling and tapping on several faces of the part in the same set-up.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The DMU 80 T is a Deckel Maho universal machining centre with travels of 880 x 630 x 630 mm. It is designed for medium-sized parts requiring several operations per set-up, in toolmaking, mouldmaking and precision engineering.
Model and control features
According to listings for other DMU 80 T units, the model is equipped with a Heidenhain iTNC 530 control, SK 40 taper, a 32-tool magazine and spindle speeds of up to 10,000 rpm; these are model data, not confirmed here. In the photos of this unit, the console shows a control with Heidenhain-style conversational programming.
Configuration of this unit
Model marked on the front: DMU 80 T Deckel Maho
X, Y, Z travels: 880 x 630 x 630 mm
Spindle speed: 8,000 rpm
Year: 2001
Weight: 9,000 kg
Vice on the table and extraction hose, visible in photos
Typical applications
Machining of moulds, tooling and precision engineering parts, with milling, drilling and tapping on several faces of the part in the same set-up.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/machining-centre-deckel-dmu80t
