





Machining centre Cincinnati Arrow500
Technical specification
| Category | Machining centres |
| Make | CINCINNATI |
| Condition | Used |
| Location | Spain |
Description
Cincinnati Arrow 500 vertical machining centre
The Arrow 500 is a Cincinnati Milacron vertical machining centre with travels of 510 mm on all three axes and a 700 x 520 mm table, suitable for small and medium-sized parts and general machining shops.
Key strengths
According to listings for the model on machinery portals, the Arrow 500 is offered with Cincinnati's Acramatic control and a tool changer.
Configuration of this unit
Model: Arrow 500 (marked on the front)
Control with Cincinnati Milacron branding on the panel and electronic handwheel with axis selector
Table: 700 x 520 mm
X, Y, Z travels: 510 x 510 x 510 mm
Taper: ISO 40 DIN 69871
Spindle: 8,000 rpm
Umbrella-type tool changer
No through-tool coolant
Overall dimensions: 2,200 x 2,500 x 2,400 mm
Typical applications
Milling of small and medium-sized prismatic parts, tooling, drilling and tapping in short and medium runs.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Arrow 500 is a Cincinnati Milacron vertical machining centre with travels of 510 mm on all three axes and a 700 x 520 mm table, suitable for small and medium-sized parts and general machining shops.
Key strengths
According to listings for the model on machinery portals, the Arrow 500 is offered with Cincinnati's Acramatic control and a tool changer.
Configuration of this unit
Model: Arrow 500 (marked on the front)
Control with Cincinnati Milacron branding on the panel and electronic handwheel with axis selector
Table: 700 x 520 mm
X, Y, Z travels: 510 x 510 x 510 mm
Taper: ISO 40 DIN 69871
Spindle: 8,000 rpm
Umbrella-type tool changer
No through-tool coolant
Overall dimensions: 2,200 x 2,500 x 2,400 mm
Typical applications
Milling of small and medium-sized prismatic parts, tooling, drilling and tapping in short and medium runs.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/machining-centre-cincinnati-arrow500
