




Machining centre Brother TC--S2C-0
Technical specification
| Category | Machining centres |
| Make | BROTHER |
| Condition | Used |
| Location | Spain |
Description
Brother TC-S2C-0 machining centre
The Brother TC-S2C-0 is a CNC drilling and tapping centre (‘CNC Tapping Center’, as marked on the machine) designed for small and medium-sized parts involving many drilling, tapping and light milling operations.
Key strengths
According to the manufacturer, the TC-S2C series is built around a high-speed BT30 spindle and a fast disc-type tool changer, designed to cut cycle times in series production. Through-spindle coolant helps with deep drilling and tapping.
Configuration of this unit
Year: 2006
Table: 800 x 320 mm; X/Y/Z travels: 700 x 400 x 300 mm
BT-30 taper; spindle up to 12,000 rpm according to our data sheet
Disc-type tool changer according to our data sheet
Through-spindle coolant and chain-type swarf conveyor according to our data sheet
Dimensions: 2,135 x 2,844 x 2,616 mm
Typical applications
Series production of automotive, hydraulic, electronic and precision engineering parts in aluminium, cast iron and steel.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Brother TC-S2C-0 is a CNC drilling and tapping centre (‘CNC Tapping Center’, as marked on the machine) designed for small and medium-sized parts involving many drilling, tapping and light milling operations.
Key strengths
According to the manufacturer, the TC-S2C series is built around a high-speed BT30 spindle and a fast disc-type tool changer, designed to cut cycle times in series production. Through-spindle coolant helps with deep drilling and tapping.
Configuration of this unit
Year: 2006
Table: 800 x 320 mm; X/Y/Z travels: 700 x 400 x 300 mm
BT-30 taper; spindle up to 12,000 rpm according to our data sheet
Disc-type tool changer according to our data sheet
Through-spindle coolant and chain-type swarf conveyor according to our data sheet
Dimensions: 2,135 x 2,844 x 2,616 mm
Typical applications
Series production of automotive, hydraulic, electronic and precision engineering parts in aluminium, cast iron and steel.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/machining-centre-brother-tc-s2c-0
