






















MACHINE A POINTER “HAUSER-SIP” TYPE MP-52
Technical specification
| Category | Plants and Machinery |
| Condition | Used |
| Location | Switzerland |
| Type | MP-52 |
Description
Origin of manufacture CH
Voltage 50 Hz 3×380 V
Dimensions LxWxH 2930x2370x2690 mm
Net machine weight 6500 kg
TECHNICAL CHARACTERISTICS
Table length 1020 mm
Table width 860 mm
Longitudinal travel (axis X) 900 mm
Cross-sectional travel (Y-axis) 600 mm
Vertical travel (Z-axis) 635 mm
Weight allowed on table max.800 kg
spindle ISO40 Cone
travel spindle drilling (Z-axis) 200 mm
Table distance to spindle 15 – 850 mm
spindle speeds from 10 – 800 rpm
to 800 – 2500 rpm
5 table advances mm/min
at 5000 mm/min
Backstage spindle drilling:
number (not) 6
Of 0.03 mm/r
at 0.33 mm/r
Distance between columns 950 mm
Voltage 50 Hz 3×380 Volt
Engine spindle 4.5 kW
If there is any error or omission, the technical information is given to you without obligation.
Voltage 50 Hz 3×380 V
Dimensions LxWxH 2930x2370x2690 mm
Net machine weight 6500 kg
TECHNICAL CHARACTERISTICS
Table length 1020 mm
Table width 860 mm
Longitudinal travel (axis X) 900 mm
Cross-sectional travel (Y-axis) 600 mm
Vertical travel (Z-axis) 635 mm
Weight allowed on table max.800 kg
spindle ISO40 Cone
travel spindle drilling (Z-axis) 200 mm
Table distance to spindle 15 – 850 mm
spindle speeds from 10 – 800 rpm
to 800 – 2500 rpm
5 table advances mm/min
at 5000 mm/min
Backstage spindle drilling:
number (not) 6
Of 0.03 mm/r
at 0.33 mm/r
Distance between columns 950 mm
Voltage 50 Hz 3×380 Volt
Engine spindle 4.5 kW
If there is any error or omission, the technical information is given to you without obligation.
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/machine-a-pointer-hauser-sip-type-mp-52/
