











Machine a ETINCELER with threads (440, ROBOFIL)
Technical specification
| Category | Thread & Worm Machinery |
| Condition | Used |
| Location | Switzerland |
| Type | ROBOFIL 440 |
Description
Origin of manufacture CH
Voltage 400V / 50/60Hz / 3ph.
Net weight (m/c + cabinet) 3250 kg + 400 kg
Customs position 8456.30 20
Dimensions 260x281x225 cm
TECHNICAL CHARACTERISTICS
Type of machining immersion
Maximum part dimensions 1200x700x400 mm
Maximum part weight 1500 kg
Table dimensions 900×600 mm
Floor distance – table 900 mm
Total volume of the 1200 L dielectric
X, Y, Z, U and V axes
Races X, Y, Z 550 x 350 x 400 mm
Racing U, V 550 x 350 mm
Anti-collision protection axes X, Y, U, V, Z
Conical milling, maximum cone +/- 30° / 400 mm
Available wire diameters Ø 0.25 mm (option 0.1/0.2/0.3 mm)
Types of closed diamond wire guides, without space
Weight and type of coil available (Standard DIN) 1.6 kg (K 100) to 8 (K 160)
Weight and type of coil available (standard JIS) 3(P3) to 5(P5)
Dielectric
Paper filters 2 cartridges
Dielectric temperature +/- 1°C
Total volume resin deionization 20 L
Maximum injection pressure 20 bar
Double source generator Isopulse
Power supply 380/400V 3 phases
Total power 10 KVA
Maximum cutting speed 400 mm2/min
Minimum surface roughness 0.20 micron Ra
Measuring installation linear rules glass
Resolution measure 0.5 micron
Servomoteurs AC type
any error or omission the technical information is given to you without commitment
Voltage 400V / 50/60Hz / 3ph.
Net weight (m/c + cabinet) 3250 kg + 400 kg
Customs position 8456.30 20
Dimensions 260x281x225 cm
TECHNICAL CHARACTERISTICS
Type of machining immersion
Maximum part dimensions 1200x700x400 mm
Maximum part weight 1500 kg
Table dimensions 900×600 mm
Floor distance – table 900 mm
Total volume of the 1200 L dielectric
X, Y, Z, U and V axes
Races X, Y, Z 550 x 350 x 400 mm
Racing U, V 550 x 350 mm
Anti-collision protection axes X, Y, U, V, Z
Conical milling, maximum cone +/- 30° / 400 mm
Available wire diameters Ø 0.25 mm (option 0.1/0.2/0.3 mm)
Types of closed diamond wire guides, without space
Weight and type of coil available (Standard DIN) 1.6 kg (K 100) to 8 (K 160)
Weight and type of coil available (standard JIS) 3(P3) to 5(P5)
Dielectric
Paper filters 2 cartridges
Dielectric temperature +/- 1°C
Total volume resin deionization 20 L
Maximum injection pressure 20 bar
Double source generator Isopulse
Power supply 380/400V 3 phases
Total power 10 KVA
Maximum cutting speed 400 mm2/min
Minimum surface roughness 0.20 micron Ra
Measuring installation linear rules glass
Resolution measure 0.5 micron
Servomoteurs AC type
any error or omission the technical information is given to you without commitment
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/machine-a-etinceler-a-filcharmilles-robofil-440/
