Home / Metal cutting / Sawing, Filing and Cutting-off / MACC Special 335 CSO Gravity Feed Double Mitre Bandsaw





MACC Special 335 CSO Gravity Feed Double Mitre Bandsaw
Technical specification
| Category | Sawing, Filing and Cutting-off |
| Model | Macc Special 335 CSO |
| Condition | Used |
| Location | United Kingdom |
| Condition | New |
| Model | Macc Special 335 CSO |
| Section capacity (90º) | 180 x 330mm |
| Diameter capacity (90º) | 260mm |
| Mitre capacity | 45 - 0 - 60 degrees |
| Blade speed range | 38-78m/min |
Description
The Macc Special 335CSO is a double mitre bandsaw with hydraulic feed.
Sawing machine with bow falling controlled by a hydraulic circuit
Vertical rotation on bolt with adjustable tapered bearings without backlash
High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw
Appropriately dimensioned flywheels
Strong band guides with tight stress-raiser bearings and adjustable widia tips
Band stretching is obtained by electro-mechanical blade tensioner with microswitch
Vice with a device for quick approach
Wide rotating material support table
Accident-preventing devices on the flywheel casing, on the control handle, and on the blade
Hydraulic cylinder for controlled descent
Removable chip collection tray
Cutting thickness 1,2 mm
Cutting range 45° left 60° right
Adjustable stop for cuts of the same size
24 V low tension plant
0,06 kW power-driver pump for band cooling
Sawing machine with bow falling controlled by a hydraulic circuit
Vertical rotation on bolt with adjustable tapered bearings without backlash
High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw
Appropriately dimensioned flywheels
Strong band guides with tight stress-raiser bearings and adjustable widia tips
Band stretching is obtained by electro-mechanical blade tensioner with microswitch
Vice with a device for quick approach
Wide rotating material support table
Accident-preventing devices on the flywheel casing, on the control handle, and on the blade
Hydraulic cylinder for controlled descent
Removable chip collection tray
Cutting thickness 1,2 mm
Cutting range 45° left 60° right
Adjustable stop for cuts of the same size
24 V low tension plant
0,06 kW power-driver pump for band cooling
Imported from the RK International Machine Tools Ltd stock feed (https://www.rk-int.com/wp-json/wc/store/v1/products). Source listing: https://www.rk-int.com/product/macc-special-335-cso-gravity-feed-double-mitre-bandsaw/
