














Lathe Turret TMP6261 610X2000
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
What is it?
centre lathe conventional Turret (TPM6261 model according to sheet), of 610 mm of turning over and 2.000 mm between points, to turn axes, trees and pieces of revolution in general mechanical workshops.
Strengths
The bench is marked "610x2000" and the head "Turret TPM626..." (last unreadable figure). With 80 mm spindle hole and a 7,5 kW engine, it is a robust machine for cutting and finishing of medium and long parts.
Configuration of this unit
Model: Turret TPM6261 (sheet); sign "610x2000" on the bench
Distance between points: 2.000 mm
Main hole diameter: 80 mm
Adjusted diameter on bench: 610 mm; on neckline: 830 mm; on car: 370 mm
Bank width: 400 mm; speed: up to 1.400 rpm; power: 7,5 kW
External measures: 3.668 x 1.130 x 1.367 mm; weight: 2.787 kg
Fagor Innova Tote Viewer
Three-claw chuck, tailstock and transparent protection in the car
Typical applications
axes, rollers, pulleys, flanges and repair and maintenance parts, in general mechanical workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
centre lathe conventional Turret (TPM6261 model according to sheet), of 610 mm of turning over and 2.000 mm between points, to turn axes, trees and pieces of revolution in general mechanical workshops.
Strengths
The bench is marked "610x2000" and the head "Turret TPM626..." (last unreadable figure). With 80 mm spindle hole and a 7,5 kW engine, it is a robust machine for cutting and finishing of medium and long parts.
Configuration of this unit
Model: Turret TPM6261 (sheet); sign "610x2000" on the bench
Distance between points: 2.000 mm
Main hole diameter: 80 mm
Adjusted diameter on bench: 610 mm; on neckline: 830 mm; on car: 370 mm
Bank width: 400 mm; speed: up to 1.400 rpm; power: 7,5 kW
External measures: 3.668 x 1.130 x 1.367 mm; weight: 2.787 kg
Fagor Innova Tote Viewer
Three-claw chuck, tailstock and transparent protection in the car
Typical applications
axes, rollers, pulleys, flanges and repair and maintenance parts, in general mechanical workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-turret-tmp6261-610x2000
