





Lathe PR 1600X5000
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | PR |
| Condition | Used |
| Location | Spain |
Description
Centre lathe large-bench with 5.000 mm between points
centre lathe heavy with "PR" emblem in the head, 5.000 mm between points and 1.200 mm diameter admitted on the bench, according to our tab. It is a large lathe for long pieces and large diameter, such as cylinders, rollers and axes. (Z10Z.)
Strengths
In the photos you can see a chuck of large diameter with radial claws, a closed ring steady rest with adjustable supports and a very long bench. The head has a speed and advance plate, and the range controls are grouped on the front.
Configuration of this unit
Model: PR (according to sheet); emblem "PR" in the head
Distance between points: 5.000 mm
Admitted diameter on a bench: 1.200 mm
chuck large diameter dish with radial claws
Closed ring moon with adjustable supports
tailstock with tip
Square tool holder turret
Portable chain next to the bench
Typical applications
Boring of cylinders, rollers, long axes and large diameter parts in heavy machining, heating and industrial maintenance workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
centre lathe heavy with "PR" emblem in the head, 5.000 mm between points and 1.200 mm diameter admitted on the bench, according to our tab. It is a large lathe for long pieces and large diameter, such as cylinders, rollers and axes. (Z10Z.)
Strengths
In the photos you can see a chuck of large diameter with radial claws, a closed ring steady rest with adjustable supports and a very long bench. The head has a speed and advance plate, and the range controls are grouped on the front.
Configuration of this unit
Model: PR (according to sheet); emblem "PR" in the head
Distance between points: 5.000 mm
Admitted diameter on a bench: 1.200 mm
chuck large diameter dish with radial claws
Closed ring moon with adjustable supports
tailstock with tip
Square tool holder turret
Portable chain next to the bench
Typical applications
Boring of cylinders, rollers, long axes and large diameter parts in heavy machining, heating and industrial maintenance workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-pr-1600x5000
