



Lathe Pinacho SP-180
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | PINACHO |
| Condition | Used |
| Location | Spain |
Description
Used Pinacho SP-180 centre lathe
The SP-180 is a compact Pinacho centre lathe with 1,000 mm between centres and 360 mm swing over bed, according to our data sheet, which dates it to 2011. The model name is marked on the headstock. It is a workshop machine for shafts, bushes and small to medium-sized parts.
Data sheet and photo details
The spindle bore is 42 mm, the bed is 250 mm wide and speeds range from 60 to 2,000 rpm with a 3 kW motor. The photos show a two-axis Fagor Innova digital readout, a transparent guard and a quick-change toolpost.
Configuration of this unit
Make and model: Pinacho SP-180; year 2011 (data sheet)
Distance between centres: 1,000 mm; spindle bore: 42 mm
Swing over bed: 360 mm; in gap: 515 mm; over cross slide: 205 mm
Bed width: 250 mm; speeds: 60 to 2,000 rpm; motor: 3 kW
Fagor Innova digital readout, X and Z axes (visible in the photos)
Transparent carriage guard and quick-change toolpost (visible)
Typical applications
Turning small and medium-sized parts, repair, maintenance and short runs.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The SP-180 is a compact Pinacho centre lathe with 1,000 mm between centres and 360 mm swing over bed, according to our data sheet, which dates it to 2011. The model name is marked on the headstock. It is a workshop machine for shafts, bushes and small to medium-sized parts.
Data sheet and photo details
The spindle bore is 42 mm, the bed is 250 mm wide and speeds range from 60 to 2,000 rpm with a 3 kW motor. The photos show a two-axis Fagor Innova digital readout, a transparent guard and a quick-change toolpost.
Configuration of this unit
Make and model: Pinacho SP-180; year 2011 (data sheet)
Distance between centres: 1,000 mm; spindle bore: 42 mm
Swing over bed: 360 mm; in gap: 515 mm; over cross slide: 205 mm
Bed width: 250 mm; speeds: 60 to 2,000 rpm; motor: 3 kW
Fagor Innova digital readout, X and Z axes (visible in the photos)
Transparent carriage guard and quick-change toolpost (visible)
Typical applications
Turning small and medium-sized parts, repair, maintenance and short runs.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/lathe-pinacho-sp-180
