















Lathe Pinacho S90-260
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | PINACHO |
| Condition | Used |
| Location | Spain |
Description
What is it?
centre lathe Pinacho S-90/260 with 1.625 mm between points, to turn axes, mats and medium-sized pieces of revolution in general mechanics workshops.
Strengths
Pinacho is a Spanish manufacturer of lathes. The S-90 series is a range of parallel lathes for general use; (Z6Z.) the head sign indicates "S-90/260."
Configuration of this unit
Model: S-90/260 (head sign)
Year: 1999 (according to data sheet)
Distance between points: 1.625 mm
Main hole diameter: 68 mm (tab)
Adjusted diameter on bench: 530 mm; on neckline: 780 mm; on car: 325 mm
Bank width: 350 mm; speed: 30 - 1.500 rpm; power: 5,5 kW
External measures: 2.980 x 1.050 x 1.730 mm; weight: 1.795 kg (sheet)
Three-claw chuck, four-position tool holder, tailstock and window protection
Typical applications
axes, casings, pulleys, flanges and maintenance and repair parts, in addition to threaded and cylinder, in general mechanical workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
centre lathe Pinacho S-90/260 with 1.625 mm between points, to turn axes, mats and medium-sized pieces of revolution in general mechanics workshops.
Strengths
Pinacho is a Spanish manufacturer of lathes. The S-90 series is a range of parallel lathes for general use; (Z6Z.) the head sign indicates "S-90/260."
Configuration of this unit
Model: S-90/260 (head sign)
Year: 1999 (according to data sheet)
Distance between points: 1.625 mm
Main hole diameter: 68 mm (tab)
Adjusted diameter on bench: 530 mm; on neckline: 780 mm; on car: 325 mm
Bank width: 350 mm; speed: 30 - 1.500 rpm; power: 5,5 kW
External measures: 2.980 x 1.050 x 1.730 mm; weight: 1.795 kg (sheet)
Three-claw chuck, four-position tool holder, tailstock and window protection
Typical applications
axes, casings, pulleys, flanges and maintenance and repair parts, in addition to threaded and cylinder, in general mechanical workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-pinacho-s90-261
