






Lathe Pinacho S90/225X1500
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
Centre lathe Pinacho S-90/225
The Pinacho S-90/225 is a centre lathe made by Metosa (Castejón del Puente, Huesca), with 1.650 mm between points and 450 mm of overboard. It serves for axes general turning and medium-sized parts.
Strengths of the S-90 series
According to ads from other units of the same model, the S-90/225 is offered with three-clad chuck mm and fast-change turret, with 12 speeds between 40 and 2.200 rpm. Our tab indicates a maximum of 2.200 rpm.
Configuration of this unit
Model: Pinacho S-90/225, CE-marked Metosa manufacturer plate
Serial No.: 32109
Year: 1996 (according to data sheet; to be confirmed)
Distance between points: 1.650 mm
spindle hole diameter: 52 mm
Flying on a bench: 450 mm; on a neckline: 650 mm; on a chariot: 260 mm
Bank width: 300 mm
Maximum speed: 2.200 rpm
External measurements: 2.880 x 995 x 1.620 mm
Three-axes Fagor display
Three-claw chuck, chuck protector with window, tool turret with refrigerant hose
Typical applications
axes torneado and general mechanical parts in maintenance, utility and production workshops in short series.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Pinacho S-90/225 is a centre lathe made by Metosa (Castejón del Puente, Huesca), with 1.650 mm between points and 450 mm of overboard. It serves for axes general turning and medium-sized parts.
Strengths of the S-90 series
According to ads from other units of the same model, the S-90/225 is offered with three-clad chuck mm and fast-change turret, with 12 speeds between 40 and 2.200 rpm. Our tab indicates a maximum of 2.200 rpm.
Configuration of this unit
Model: Pinacho S-90/225, CE-marked Metosa manufacturer plate
Serial No.: 32109
Year: 1996 (according to data sheet; to be confirmed)
Distance between points: 1.650 mm
spindle hole diameter: 52 mm
Flying on a bench: 450 mm; on a neckline: 650 mm; on a chariot: 260 mm
Bank width: 300 mm
Maximum speed: 2.200 rpm
External measurements: 2.880 x 995 x 1.620 mm
Three-axes Fagor display
Three-claw chuck, chuck protector with window, tool turret with refrigerant hose
Typical applications
axes torneado and general mechanical parts in maintenance, utility and production workshops in short series.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-pinacho-s90-225x1500
