





Lathe Pinacho S90-180
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
Centre lathe Pinacho S-90/180 de 1997
The Pinacho S-90/180 is a conventional centre lathe of compact size, made by Metosa (Castejón del Puente, Huesca) in 1997, according to its plate. Admit 360 mm on bade and 750 mm between points.
Strengths
The head plate collects 18 speeds, from 30 to 2.000 rpm, in three ranges, and the threaded box includes tables for metric thread, Whitworth, module and diametrical pitch. The machine has mobile protection with window over the chuck and an emergency stop button on the apron.
Configuration of this unit
Model: S90/180, nº 31291, year 1997 (CE plate)
Manufacturer: Metosa, Castejón del Puente (Huesca)
Distance between points: 750 mm
spindle hole diameter: 52 mm (as per tab)
Admitted diameter on a bench: 360 mm
Admitted diameter on neckline: 520 mm
Admitted diameter on car: 205 mm
Bank width: 250 mm
Speed: 30 to 2.000 rpm
Three-claw chuck, quadruple turret and tailstock with bead
Typical applications
Torneado, refrentado, drilled and threaded axes, casings and maintenance parts in general machining and utility workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Pinacho S-90/180 is a conventional centre lathe of compact size, made by Metosa (Castejón del Puente, Huesca) in 1997, according to its plate. Admit 360 mm on bade and 750 mm between points.
Strengths
The head plate collects 18 speeds, from 30 to 2.000 rpm, in three ranges, and the threaded box includes tables for metric thread, Whitworth, module and diametrical pitch. The machine has mobile protection with window over the chuck and an emergency stop button on the apron.
Configuration of this unit
Model: S90/180, nº 31291, year 1997 (CE plate)
Manufacturer: Metosa, Castejón del Puente (Huesca)
Distance between points: 750 mm
spindle hole diameter: 52 mm (as per tab)
Admitted diameter on a bench: 360 mm
Admitted diameter on neckline: 520 mm
Admitted diameter on car: 205 mm
Bank width: 250 mm
Speed: 30 to 2.000 rpm
Three-claw chuck, quadruple turret and tailstock with bead
Typical applications
Torneado, refrentado, drilled and threaded axes, casings and maintenance parts in general machining and utility workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-pinacho-s90-180
