






Lathe Pinacho L8.200
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | PINACHO |
| Condition | Used |
| Location | Spain |
Description
Pinacho L-8/200 centre lathe
The Pinacho L-8/200 is a medium-sized centre lathe with 1,100 mm between centres and 400 mm swing over bed. It is a workshop machine for turning small and medium-sized parts.
Key strengths
According to our data sheet, the spindle runs from 38 to 2,200 rpm, a wide range for working on anything from large to small diameters. The unit has a front plate marked ‘Mod. L-8/200’ and a table of metric, Whitworth and module threads.
Configuration of this unit
Model: Pinacho L-8/200 (front plate)
Distance between centres: 1,100 mm
Spindle bore: 42 mm
Swing over bed: 400 mm; in gap: 600 mm; over cross slide: 300 mm
Bed width: 300 mm
Speeds: 38 to 2,200 rpm
Overall dimensions: 2,200 x 1,000 x 1,600 mm
Three-jaw chuck
Yellow transparent chuck guard and side splash screen
Tailstock
Typical applications
Turning of shafts, bushes and general engineering parts in maintenance, toolroom and small-batch workshops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Pinacho L-8/200 is a medium-sized centre lathe with 1,100 mm between centres and 400 mm swing over bed. It is a workshop machine for turning small and medium-sized parts.
Key strengths
According to our data sheet, the spindle runs from 38 to 2,200 rpm, a wide range for working on anything from large to small diameters. The unit has a front plate marked ‘Mod. L-8/200’ and a table of metric, Whitworth and module threads.
Configuration of this unit
Model: Pinacho L-8/200 (front plate)
Distance between centres: 1,100 mm
Spindle bore: 42 mm
Swing over bed: 400 mm; in gap: 600 mm; over cross slide: 300 mm
Bed width: 300 mm
Speeds: 38 to 2,200 rpm
Overall dimensions: 2,200 x 1,000 x 1,600 mm
Three-jaw chuck
Yellow transparent chuck guard and side splash screen
Tailstock
Typical applications
Turning of shafts, bushes and general engineering parts in maintenance, toolroom and small-batch workshops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/lathe-pinacho-l8-200
