


Lathe Pinacho L1 180x1000
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | PINACHO |
| Condition | Used |
| Location | Spain |
Description
Pinacho L-1/180 centre lathe
A centre lathe from the Pinacho L-1 series, with 1,000 mm between centres and 360 mm swing over bed. It is a compact lathe for shafts, bushes and small to medium-sized parts in machine shops and maintenance workshops.
Visible equipment
The headstock plate reads "Mod. L-1/180" and includes a speed chart with three ranges, from 60 to 2,000 rpm, plus charts for metric, Whitworth and module threads and for longitudinal and cross feeds. A Lardi toolpost, three-jaw chuck, flexible lamp and handwheels with graduated dials can be seen.
Configuration of this unit
Make and model: Pinacho L-1/180 (headstock plate)
Distance between centres: 1,000 mm
Spindle bore: 42 mm
Swing over bed: 360 mm; in gap: 510 mm; over cross slide: 340 mm
Bed width: 250 mm
Speeds: 60 to 2,000 rpm (plate)
Overall dimensions: 2,170 x 950 x 1,285 mm
Lardi toolpost and three-jaw chuck
Typical applications
Turning and threading of small and medium-sized parts in machine shops, maintenance, toolmaking and training.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
A centre lathe from the Pinacho L-1 series, with 1,000 mm between centres and 360 mm swing over bed. It is a compact lathe for shafts, bushes and small to medium-sized parts in machine shops and maintenance workshops.
Visible equipment
The headstock plate reads "Mod. L-1/180" and includes a speed chart with three ranges, from 60 to 2,000 rpm, plus charts for metric, Whitworth and module threads and for longitudinal and cross feeds. A Lardi toolpost, three-jaw chuck, flexible lamp and handwheels with graduated dials can be seen.
Configuration of this unit
Make and model: Pinacho L-1/180 (headstock plate)
Distance between centres: 1,000 mm
Spindle bore: 42 mm
Swing over bed: 360 mm; in gap: 510 mm; over cross slide: 340 mm
Bed width: 250 mm
Speeds: 60 to 2,000 rpm (plate)
Overall dimensions: 2,170 x 950 x 1,285 mm
Lardi toolpost and three-jaw chuck
Typical applications
Turning and threading of small and medium-sized parts in machine shops, maintenance, toolmaking and training.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/lathe-pinacho-l1-180x1000
