Home / Metal cutting / Turning (Automatics, Borers and Lathes) / Lathe OUTILLEUR SCHAUBLIN 70 to W-12, reconditioned








Lathe OUTILLEUR SCHAUBLIN 70 to W-12, reconditioned
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | SCHAUBLIN |
| Condition | Used |
| Location | Switzerland |
| Type | 70 TO W-12 |
| Size | Occasion |
| Make | SCHAUBLIN |
| Reconditioned | Yes |
Description
Composed of
– 1 established NEW with 1400x800x50H synthetic resin top mm color Argolite white
with 1 7 drawers cabinet, 1 foot, color anthrasite grey RAl7016
– 1 bench for control over
– 1 headstock fixed for W-12 clamps
– 1 screw cart reconditioned
– 1 contre-headstock lever drilling (contre-Z8Z)
spindle for W-12 clamps
– 1 individual RISA 02 training for established lathe
2 speed 700/1400 rpm
0,26/0,4 kW – 380 V 50 Hz three-phase
– 1 new switch 1-2-0-1-2
– 1 set of 10 clamps W-12
– 1 chuck 1×3 mors Burnerd Ø 80 mm W-12 with key
– 1 turret Multifix type Aa
– 3 Multifix Multifix Aad1250 type
– 1 chuck drilling Roehm 0-6 mm on cone CM2°
Origin of manufacture Switzerland
Voltage 380/50/3
Net weight 140 kg
Customs position 8458.1930
Dimensions 1600x800x1400 mm
TECHNICAL CHARACTERISTICS:
we cannot guarantee the accuracy of the data
techniques, dimensions and weights included in this list)
Capacity:
– Height of the points 70 mm
– Max. distance between points 275 mm
Bench:
– Length 600 mm
– Height 120 mm
headstock :
– For W-12 type clamps
– spindle 12 mm bore
– Switching from bar to clip, max. 8,2 mm
Truck:
– travel of the longitudinal coulisseau 60 mm
– travel of the 65 cross-section
– Diameter allowed above the trolley
– without rear tool holder 85 mm
– with rear tool holder 45 mm
– Height of points above trolley 16 mm
– Dimensions of the 8 x 8 studs
Contre-headstock :
– Interior cone of the spindle 2°
– travel of the spindle 45 mm
any error or omission the technical information is given to you without commitment
– 1 established NEW with 1400x800x50H synthetic resin top mm color Argolite white
with 1 7 drawers cabinet, 1 foot, color anthrasite grey RAl7016
– 1 bench for control over
– 1 headstock fixed for W-12 clamps
– 1 screw cart reconditioned
– 1 contre-headstock lever drilling (contre-Z8Z)
spindle for W-12 clamps
– 1 individual RISA 02 training for established lathe
2 speed 700/1400 rpm
0,26/0,4 kW – 380 V 50 Hz three-phase
– 1 new switch 1-2-0-1-2
– 1 set of 10 clamps W-12
– 1 chuck 1×3 mors Burnerd Ø 80 mm W-12 with key
– 1 turret Multifix type Aa
– 3 Multifix Multifix Aad1250 type
– 1 chuck drilling Roehm 0-6 mm on cone CM2°
Origin of manufacture Switzerland
Voltage 380/50/3
Net weight 140 kg
Customs position 8458.1930
Dimensions 1600x800x1400 mm
TECHNICAL CHARACTERISTICS:
we cannot guarantee the accuracy of the data
techniques, dimensions and weights included in this list)
Capacity:
– Height of the points 70 mm
– Max. distance between points 275 mm
Bench:
– Length 600 mm
– Height 120 mm
headstock :
– For W-12 type clamps
– spindle 12 mm bore
– Switching from bar to clip, max. 8,2 mm
Truck:
– travel of the longitudinal coulisseau 60 mm
– travel of the 65 cross-section
– Diameter allowed above the trolley
– without rear tool holder 85 mm
– with rear tool holder 45 mm
– Height of points above trolley 16 mm
– Dimensions of the 8 x 8 studs
Contre-headstock :
– Interior cone of the spindle 2°
– travel of the spindle 45 mm
any error or omission the technical information is given to you without commitment
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/tour-outilleur-schaublin-70-to-w-12-2/
