Home / Metal cutting / Turning (Automatics, Borers and Lathes) / Lathe OUTILLEUR SCHAUBLIN 102 to W-20









Lathe OUTILLEUR SCHAUBLIN 102 to W-20
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Condition | Used |
| Location | Switzerland |
| Type | 102 TO W-20 |
Description
Inventory No. 3200016 machine comprising:
1 NEUF 2000×800 mm with Urphen blue 2000x800x50 mm top
1 foot, 1 cabinet B750 with 7 drawers 1xD50/2xD75/2xD100/1xD150/1×200
1 bench for over-plane control
1 headstock part holder W-20 with gear reducer with reconditioned clamping key
1 cross cart reconditioned
1 contre-headstock aligned reconditioned (contre-Z9Z)
1 engine 380V/50Hz/3ph. 2 speeds
1 set of W20 clamps
1 chuck 2×3 mors Ø 100 mm on flask w-20
1 set of nine Multifix tool holders including
-1 turret A with AG20 stud
-3 wood holder AD1675
-1 bar holder AH2085
1 chuck self-locking clamping head 1-13 mm on tenon CM2
1 point full CM2
Origin of manufacture Switzerland
Voltage 380V. 50Hz 3Ph
Net weight env.300 kg
Customs position 8458.1930
TECHNICAL CHARACTERISTICS:
Capacity:
– height of points 102 mm
– distance between points, headstock type W, normal 470 mm
– distance between points, headstock W with 375 reducer
– diameter allowed above bench 200 mm
– diameter allowed above trolley 120 mm
Bench:
– heightxwidthxlength 160x100x1000 mm
cast iron bench with rectified donkey back profile
Dolls:
– spindle nose for W-20 clamps
– 14,5 clamped bar passage
– reducing dolls, report 1:5
Carts:
– travel of the longitudinal tool holder 90 mm
– travel of the cross tool holder 100 mm
– dimensions of 12 x 12 mm
Counter-dolls:
– inside cone of spindle of contre-headstock Morse 2 (contre-Z12Z)
– travel of the spindle, screw control and steering wheel 80 mm
any error or omission the technical information is given to you without commitment
1 NEUF 2000×800 mm with Urphen blue 2000x800x50 mm top
1 foot, 1 cabinet B750 with 7 drawers 1xD50/2xD75/2xD100/1xD150/1×200
1 bench for over-plane control
1 headstock part holder W-20 with gear reducer with reconditioned clamping key
1 cross cart reconditioned
1 contre-headstock aligned reconditioned (contre-Z9Z)
1 engine 380V/50Hz/3ph. 2 speeds
1 set of W20 clamps
1 chuck 2×3 mors Ø 100 mm on flask w-20
1 set of nine Multifix tool holders including
-1 turret A with AG20 stud
-3 wood holder AD1675
-1 bar holder AH2085
1 chuck self-locking clamping head 1-13 mm on tenon CM2
1 point full CM2
Origin of manufacture Switzerland
Voltage 380V. 50Hz 3Ph
Net weight env.300 kg
Customs position 8458.1930
TECHNICAL CHARACTERISTICS:
Capacity:
– height of points 102 mm
– distance between points, headstock type W, normal 470 mm
– distance between points, headstock W with 375 reducer
– diameter allowed above bench 200 mm
– diameter allowed above trolley 120 mm
Bench:
– heightxwidthxlength 160x100x1000 mm
cast iron bench with rectified donkey back profile
Dolls:
– spindle nose for W-20 clamps
– 14,5 clamped bar passage
– reducing dolls, report 1:5
Carts:
– travel of the longitudinal tool holder 90 mm
– travel of the cross tool holder 100 mm
– dimensions of 12 x 12 mm
Counter-dolls:
– inside cone of spindle of contre-headstock Morse 2 (contre-Z12Z)
– travel of the spindle, screw control and steering wheel 80 mm
any error or omission the technical information is given to you without commitment
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/tour-outilleur-schaublin-type-102-to-w-20-5/
