



Lathe Mashstruy C11MT
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | MASHSTRUY |
| Condition | Used |
| Location | Spain |
Description
Centre lathe Mashstruy C11MT
The C11MT is a long-banded centre lathe with 2.000 mm between points and 600 mm in diameter admitted on a banched, according to our tab. The machine signs indicate "C11MT" and "MASHSTRUY." It is a lathe for axes, flanges and pieces of revolution of medium and large size.
Data from the tab
Admit 800 mm over neckline and 400 mm over cart, with a spindle hole of 80 mm. The range of turning speeds ranges from 11,5 to 2.000 rpm. In the photos you can see a table of threads, a selection wheel of colors and the push-and-pull-off in the head. (Z4Z.)
Configuration of this unit
Brand and model: Mashstruy C11MT (bade signs)
Distance between points: 2.000 mm; spindle hole: 80 mm
Diameter on deck: 600 mm; on neckline: 800 mm; on car: 400 mm
Speed: from 11,5 to 2.000 rpm
Three-claw chuck, tool turret and tailstock (visible)
Orange chuck protector and working lamp (visible)
Typical applications
axes machining and revolution pieces up to 2.000 mm between points, industrial maintenance, repair and general mechanics workshops.
See in Ferrotall
The lathe is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The C11MT is a long-banded centre lathe with 2.000 mm between points and 600 mm in diameter admitted on a banched, according to our tab. The machine signs indicate "C11MT" and "MASHSTRUY." It is a lathe for axes, flanges and pieces of revolution of medium and large size.
Data from the tab
Admit 800 mm over neckline and 400 mm over cart, with a spindle hole of 80 mm. The range of turning speeds ranges from 11,5 to 2.000 rpm. In the photos you can see a table of threads, a selection wheel of colors and the push-and-pull-off in the head. (Z4Z.)
Configuration of this unit
Brand and model: Mashstruy C11MT (bade signs)
Distance between points: 2.000 mm; spindle hole: 80 mm
Diameter on deck: 600 mm; on neckline: 800 mm; on car: 400 mm
Speed: from 11,5 to 2.000 rpm
Three-claw chuck, tool turret and tailstock (visible)
Orange chuck protector and working lamp (visible)
Typical applications
axes machining and revolution pieces up to 2.000 mm between points, industrial maintenance, repair and general mechanics workshops.
See in Ferrotall
The lathe is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-mashstruy-c11mt
