



Lathe Martin DLZ 502
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
Used K. Martin DLZ 502 centre lathe
The DLZ 502 is a centre lathe from the German manufacturer K. Martin (Offenburg), as shown on the headstock plate, with 3,000 mm between centres according to our data sheet. It is a machine for turning long shafts and long turned parts in the workshop.
What the photos show
The headstock has a speed selector wheel and levers, and the carriage carries a toolpost turret; the leadscrew, the feed shaft and an orange chuck guard can be seen. The machine is shown with green guard panels resting loose next to the bed.
Configuration of this unit
Make and model: K. Martin DLZ 502
Distance between centres: 3,000 mm
Toolpost turret and chuck guard (visible)
Condition visible in photos: heavily worn paintwork and guard panels not fitted, resting next to the bed
Typical applications
Machining of long shafts, leadscrews and rolls, industrial maintenance and repair work, where a long bed and a sturdy general-purpose machine are needed.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The DLZ 502 is a centre lathe from the German manufacturer K. Martin (Offenburg), as shown on the headstock plate, with 3,000 mm between centres according to our data sheet. It is a machine for turning long shafts and long turned parts in the workshop.
What the photos show
The headstock has a speed selector wheel and levers, and the carriage carries a toolpost turret; the leadscrew, the feed shaft and an orange chuck guard can be seen. The machine is shown with green guard panels resting loose next to the bed.
Configuration of this unit
Make and model: K. Martin DLZ 502
Distance between centres: 3,000 mm
Toolpost turret and chuck guard (visible)
Condition visible in photos: heavily worn paintwork and guard panels not fitted, resting next to the bed
Typical applications
Machining of long shafts, leadscrews and rolls, industrial maintenance and repair work, where a long bed and a sturdy general-purpose machine are needed.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/lathe-martin-dlz-502
