MachineDeal by EAMTM · International marketplace for used machine toolsEN · DE · FR · NL · PL · ES · ITDealersEAMTMMember login
EAMTM logo
MachineDealPowered by EAMTM
List your machines

Lathe Lacfer CR-2 E250X1500

✓ Listed by Ferrotall Maquinas Herramienta S.L.Spain
Technical specification
CategoryTurning (Automatics, Borers and Lathes)
MakeLACFER
ConditionUsed
LocationSpain
Description
Centre lathe Lacfer CR2 E250x1500
The Lacfer CR2 E250x1500 is a centre lathe of 1.500 mm between points and 500 mm diameter on a bench, made in 1989 according to our tab. It is a workshop machine for turning axes, casings and medium-sized pieces of revolution, with a spindle hole of 80 mm.
What you see in the photos
The head has the Lacfer logo, a speed wheel with values from 18 to 1.600 and the screw box, with an advance box with levers below.
Configuration of this unit
Brand and model: Lacfer CR2 E250x1500; year 1989 (sheet)
Distance between points: 1.500 mm; spindle hole: 80 mm
Diameter on a bench: 500 mm; on a chariot: 320 mm; width of a bench: 335 mm
Speed: from 18 to 1.600 rpm
Typical applications
Free parts and short series, industrial maintenance and repair.
See in Ferrotall
The lathe is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.

Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.

Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-lacfer-cr-2-e250x1500