Home / Metal cutting / Turning (Automatics, Borers and Lathes) / Lathe Heller mod. CE460/1500 S/N 1070314





Lathe Heller mod. CE460/1500 S/N 1070314
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | HELLER |
| Condition | Used |
| Location | Spain |
Description
Centre lathe Heller CE460/1500
The head plate is "CE460/1500, lathe precision with head gears." It has 1.500 mm between points, 460 mm on bade and 700 mm on neckline. It is a lathe workshop for axes, flanges and casings with manual operation and display of heights.
Visual equipment
The head shows speed table, step and forward selectors and the Heller emblem on the front. On the head there is a digital display of heights. You can see a multi-position tool holder, the tailstock, a threadbar and a protective forward bar. The spindle hole is visible on the side of the head. (Z7Z.)
Configuration of this unit
Model: CE460/1500 (head plate)
Serial No: 1070314 (indicated in product description)
Year: 2011
Distance between points: 1.500 mm
Main hole: 80 mm
Admitted on a bench: 460 mm; on a neckline: 700 mm; on a chariot: 300 mm
Bank width: 340 mm
Maximum speed: 1.800 rpm
External measurements: 2.950 x 1.150 x 1.600 mm
Digital display of heights on the head
Typical applications
axes general coating, flanges and casings with dimensional control by visualizer, in machining, maintenance and utility workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The head plate is "CE460/1500, lathe precision with head gears." It has 1.500 mm between points, 460 mm on bade and 700 mm on neckline. It is a lathe workshop for axes, flanges and casings with manual operation and display of heights.
Visual equipment
The head shows speed table, step and forward selectors and the Heller emblem on the front. On the head there is a digital display of heights. You can see a multi-position tool holder, the tailstock, a threadbar and a protective forward bar. The spindle hole is visible on the side of the head. (Z7Z.)
Configuration of this unit
Model: CE460/1500 (head plate)
Serial No: 1070314 (indicated in product description)
Year: 2011
Distance between points: 1.500 mm
Main hole: 80 mm
Admitted on a bench: 460 mm; on a neckline: 700 mm; on a chariot: 300 mm
Bank width: 340 mm
Maximum speed: 1.800 rpm
External measurements: 2.950 x 1.150 x 1.600 mm
Digital display of heights on the head
Typical applications
axes general coating, flanges and casings with dimensional control by visualizer, in machining, maintenance and utility workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-heller-mod-ce460-1500-n-s-1070314
