


Lathe Helfer T460X1000
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | HELFER |
| Condition | Used |
| Location | Spain |
Description
Centre lathe Helfer T460x1000
The T460x1000 is a centre lathe of the Helfer brand with 1.000 mm distance between points and 460 mm diameter admitted on a bench. Solve the axes turning, flanges and machining parts in workshop and maintenance.
What the model offers
The head includes a range of speeds from 25 to 2.000 rpm and a spindle hole of 80 mm, which supports the bar pass. The unit carries a two-axes display on the bench, as seen in the photos.
Configuration of this unit
Model: T460x1000
Distance between points: 1.000 mm
Main hole diameter: 80 mm
Admitted diameter on a bench: 460 mm
Admitted diameter on neckline: 690 mm
Admitted diameter on car: 274 mm
Bank width: 300 mm
spindle speed: 25-2.000 rpm
Year: 2009 (according to our tab)
External measurements: 2.250 x 1.120 x 1.730 mm
Display of two axes, tool turret and tailstock
Typical applications
axes torneado, casings and flanges, repair work and short series in machining, maintenance and utility workshops.
See in Ferrotall
The lathe is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The T460x1000 is a centre lathe of the Helfer brand with 1.000 mm distance between points and 460 mm diameter admitted on a bench. Solve the axes turning, flanges and machining parts in workshop and maintenance.
What the model offers
The head includes a range of speeds from 25 to 2.000 rpm and a spindle hole of 80 mm, which supports the bar pass. The unit carries a two-axes display on the bench, as seen in the photos.
Configuration of this unit
Model: T460x1000
Distance between points: 1.000 mm
Main hole diameter: 80 mm
Admitted diameter on a bench: 460 mm
Admitted diameter on neckline: 690 mm
Admitted diameter on car: 274 mm
Bank width: 300 mm
spindle speed: 25-2.000 rpm
Year: 2009 (according to our tab)
External measurements: 2.250 x 1.120 x 1.730 mm
Display of two axes, tool turret and tailstock
Typical applications
axes torneado, casings and flanges, repair work and short series in machining, maintenance and utility workshops.
See in Ferrotall
The lathe is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-helfer-t460x1000
