





Lathe Gurutzpe AT 3000
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | GURUTZPE |
| Condition | Used |
| Location | Spain |
Description
Gurutzpe Super-AT centre lathe with 3,000 mm between centres
The Gurutzpe Super-AT is a heavy-duty centre lathe for long, large-diameter parts. This unit has 3,000 mm between centres, 820 mm swing over bed and 1,100 mm in the gap, according to our data sheet, which also gives 1982 as its year.
Key strengths
The headstock plate is marked «modelo SUPER-AT» and carries a table of cutting speeds and powers, and the upper panel includes a pressure gauge, an ammeter and a push-button station. Our data sheet lists an 18 CV (metric hp) main motor and a speed of 500 rpm.
Configuration of this unit
Model: SUPER-AT (headstock plate), make Gurutzpe
Year: 1982
Distance between centres: 3,000 mm
Spindle bore: 258 mm (according to our data sheet)
Swing over bed: 820 mm
Swing in gap: 1,100 mm
Swing over cross slide: 550 mm
Maximum speed: 500 rpm
Main motor power: 18 CV
Overall dimensions: 5,600 x 1,150 x 1,700 mm
Three-jaw chuck, square toolpost, fixed steady rest and tailstock
Typical applications
Roughing and finishing of long shafts, rollers, cylinders and large-diameter parts in heavy machining, repair and industrial maintenance workshops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Gurutzpe Super-AT is a heavy-duty centre lathe for long, large-diameter parts. This unit has 3,000 mm between centres, 820 mm swing over bed and 1,100 mm in the gap, according to our data sheet, which also gives 1982 as its year.
Key strengths
The headstock plate is marked «modelo SUPER-AT» and carries a table of cutting speeds and powers, and the upper panel includes a pressure gauge, an ammeter and a push-button station. Our data sheet lists an 18 CV (metric hp) main motor and a speed of 500 rpm.
Configuration of this unit
Model: SUPER-AT (headstock plate), make Gurutzpe
Year: 1982
Distance between centres: 3,000 mm
Spindle bore: 258 mm (according to our data sheet)
Swing over bed: 820 mm
Swing in gap: 1,100 mm
Swing over cross slide: 550 mm
Maximum speed: 500 rpm
Main motor power: 18 CV
Overall dimensions: 5,600 x 1,150 x 1,700 mm
Three-jaw chuck, square toolpost, fixed steady rest and tailstock
Typical applications
Roughing and finishing of long shafts, rollers, cylinders and large-diameter parts in heavy machining, repair and industrial maintenance workshops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/lathe-gurutzpe-at-3000
