





Lathe Gurutzpe A-4000
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | GURUTZPE |
| Condition | Used |
| Location | Spain |
Description
Centre lathe Gurutzpe A-4000 with 4.000 mm between points
The Gurutzpe A-4000 is a large-stranded centre lathe for long and large-diameter parts. Our tab collects 4.000 mm between points, 720 mm on bade and 1.012 mm on neckline, with a weight of 6.000 kg.
Strengths
The photos show range selection flyers in the head and a graphical table of cutting speed against diameter and rpm, useful for choosing the correct speed according to the piece. Under the bench there are trays to collect the chip.
Configuration of this unit
Model: A-4000
Brand: Gurutzpe
Distance between points: 4.000 mm
spindle hole diameter: 63 mm
Admitted diameter on a bench: 720 mm
Admitted diameter on neckline: 1.012 mm
Admitted diameter on car: 220 mm
weight: 6.000 kg
Three-claw chuck with tip in the center
tailstock with steering wheel
Typical applications
axes, long rollers and cylinders, and large-diameter parts, taking advantage of the neckline, in heavy machining and industrial maintenance workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Gurutzpe A-4000 is a large-stranded centre lathe for long and large-diameter parts. Our tab collects 4.000 mm between points, 720 mm on bade and 1.012 mm on neckline, with a weight of 6.000 kg.
Strengths
The photos show range selection flyers in the head and a graphical table of cutting speed against diameter and rpm, useful for choosing the correct speed according to the piece. Under the bench there are trays to collect the chip.
Configuration of this unit
Model: A-4000
Brand: Gurutzpe
Distance between points: 4.000 mm
spindle hole diameter: 63 mm
Admitted diameter on a bench: 720 mm
Admitted diameter on neckline: 1.012 mm
Admitted diameter on car: 220 mm
weight: 6.000 kg
Three-claw chuck with tip in the center
tailstock with steering wheel
Typical applications
axes, long rollers and cylinders, and large-diameter parts, taking advantage of the neckline, in heavy machining and industrial maintenance workshops.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-gurutzpe-a-4000
