





Lathe Geminis GE 870x4000
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | GEMINIS |
| Condition | Used |
| Location | Spain |
Description
Geminis GE-870 centre lathe with 4,000 mm between centres
The Geminis GE-870 is a heavy-duty centre lathe for long, large-diameter parts: shafts, rollers, cylinders and shell rings. This unit has 4,000 mm between centres, 870 mm swing over bed and 1,100 mm swing in gap.
Key strengths
The manufacturer's data sheet for the GE-870 (a document with no serial number, only the model reference) states a DIN 55022 size 8 spindle nose, 18 speeds and a Morse 6 tailstock. The headstock table on this unit, with L, M and R ranges, lists speeds from 16 to 1,250 rpm.
Configuration of this unit
Model: GE-870 (headstock marking)
Distance between centres: 4,000 mm
Spindle bore: 85 mm
Swing over bed: 870 mm
Swing in gap: 1,100 mm
Swing over cross slide: 540 mm
Bed width: 545 mm
Speeds: 16 to 1,250 rpm (headstock table)
Large-diameter faceplate with jaws and fixed steady rest
Typical applications
Turning of long shafts, rollers, hydraulic cylinders, shell rings and large-diameter parts in heavy machining shops, industrial maintenance and repair.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Geminis GE-870 is a heavy-duty centre lathe for long, large-diameter parts: shafts, rollers, cylinders and shell rings. This unit has 4,000 mm between centres, 870 mm swing over bed and 1,100 mm swing in gap.
Key strengths
The manufacturer's data sheet for the GE-870 (a document with no serial number, only the model reference) states a DIN 55022 size 8 spindle nose, 18 speeds and a Morse 6 tailstock. The headstock table on this unit, with L, M and R ranges, lists speeds from 16 to 1,250 rpm.
Configuration of this unit
Model: GE-870 (headstock marking)
Distance between centres: 4,000 mm
Spindle bore: 85 mm
Swing over bed: 870 mm
Swing in gap: 1,100 mm
Swing over cross slide: 540 mm
Bed width: 545 mm
Speeds: 16 to 1,250 rpm (headstock table)
Large-diameter faceplate with jaws and fixed steady rest
Typical applications
Turning of long shafts, rollers, hydraulic cylinders, shell rings and large-diameter parts in heavy machining shops, industrial maintenance and repair.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/lathe-geminis-ge-870x4000
