Home / Metal cutting / Turning (Automatics, Borers and Lathes) / Lathe Geminis 1200-25, 8000 between centres




















Lathe Geminis 1200-25, 8000 between centres
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | GEMINIS |
| Condition | Used |
| Location | Spain |
Description
What it is
Geminis GE-1200-25 heavy-duty centre lathe with 8,000 mm between centres, for machining long, large-diameter shafts, rollers and cylinders for industrial machinery, the paper, steel and shipbuilding industries.
Key strengths
The Geminis GE series is a range of heavy-duty, large-bed centre lathes; the marking on the machine reads «GE-1200-25». The large gap and swing over bed allow bulky parts to be machined, and the 160 mm spindle bore takes large-diameter tubes and hollow shafts.
Configuration of this unit
Model: 1200-25 8000 E.P. («GE-1200-25» marking on the headstock)
Distance between centres: 8,000 mm
Spindle bore: 160 mm
Swing over bed: 1,200 mm; in gap: 1,600 mm; over cross slide: 900 mm
Bed width: 850 mm; weight: 14,000 kg
Large-diameter jaw chuck
Ring-type fixed steady rest
Typical applications
Long shafts, rollers, cylinders, drive shafts, shell rings and overhaul or repair parts where the size of the workpiece rules out conventional lathes.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Geminis GE-1200-25 heavy-duty centre lathe with 8,000 mm between centres, for machining long, large-diameter shafts, rollers and cylinders for industrial machinery, the paper, steel and shipbuilding industries.
Key strengths
The Geminis GE series is a range of heavy-duty, large-bed centre lathes; the marking on the machine reads «GE-1200-25». The large gap and swing over bed allow bulky parts to be machined, and the 160 mm spindle bore takes large-diameter tubes and hollow shafts.
Configuration of this unit
Model: 1200-25 8000 E.P. («GE-1200-25» marking on the headstock)
Distance between centres: 8,000 mm
Spindle bore: 160 mm
Swing over bed: 1,200 mm; in gap: 1,600 mm; over cross slide: 900 mm
Bed width: 850 mm; weight: 14,000 kg
Large-diameter jaw chuck
Ring-type fixed steady rest
Typical applications
Long shafts, rollers, cylinders, drive shafts, shell rings and overhaul or repair parts where the size of the workpiece rules out conventional lathes.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/lathe-geminis-1200-25-8000-between-centres
