









Lathe Daewoo Puma 240MC
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | DAEWOO |
| Condition | Used |
| Location | Spain |
Description
Lathe CNC Daewoo Puma 240MC
The 240MC Puma is a lathe CNC of Doosan Daewoo tilted bench, marked on the machine. It is used for turning medium-sized parts, from bar or from mandrel, in medium and long series: automotive, hydraulic, equipment and precision mechanics.
Strengths
The Puma 240 series is very common in subcontracting workshops. According to the manufacturer's catalogue, the 240MA/MB/MC variant has axis Cs, 12 turret positions with motorized tools up to 5.000 rpm and tailstock optional; they are performance of the series, not confirmed for this unit. It has control of Fanuc Series 0i-TB with electronic steering wheel.
Configuration of this unit
Model Puma 240MC, year 2005
Fanuc Series 0i-TB control (visible on the panel)
Distance between points: 501 mm
Admitted diameter on block: 550 mm; on car: 390 mm
spindle hole: 90 mm; spindle to 3.500 rpm
Main engine power: 18,5 kW
Three-claw chuck and tool turret
Carrier of chips and electronic steering wheel
Portaherramientas and cash supplies, including revolving supplies, photographed with the machine
External measures: 3.135 x 1.643 x 1.755 mm; weight: 4.700 kg
Typical applications
Turned parts up to 550 mm in diameter on deck: axes, flanges, casings and valve bodies, with repetitive production and rapid change of utility.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The 240MC Puma is a lathe CNC of Doosan Daewoo tilted bench, marked on the machine. It is used for turning medium-sized parts, from bar or from mandrel, in medium and long series: automotive, hydraulic, equipment and precision mechanics.
Strengths
The Puma 240 series is very common in subcontracting workshops. According to the manufacturer's catalogue, the 240MA/MB/MC variant has axis Cs, 12 turret positions with motorized tools up to 5.000 rpm and tailstock optional; they are performance of the series, not confirmed for this unit. It has control of Fanuc Series 0i-TB with electronic steering wheel.
Configuration of this unit
Model Puma 240MC, year 2005
Fanuc Series 0i-TB control (visible on the panel)
Distance between points: 501 mm
Admitted diameter on block: 550 mm; on car: 390 mm
spindle hole: 90 mm; spindle to 3.500 rpm
Main engine power: 18,5 kW
Three-claw chuck and tool turret
Carrier of chips and electronic steering wheel
Portaherramientas and cash supplies, including revolving supplies, photographed with the machine
External measures: 3.135 x 1.643 x 1.755 mm; weight: 4.700 kg
Typical applications
Turned parts up to 550 mm in diameter on deck: axes, flanges, casings and valve bodies, with repetitive production and rapid change of utility.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-daewoo-puma-240mc
