MachineDeal by EAMTM · International marketplace for used machine toolsEN · DE · FR · NL · PL · ES · ITDealersEAMTMMember login
EAMTM logo
MachineDealPowered by EAMTM
List your machines

Lathe Cumbre 30

✓ Listed by Ferrotall Maquinas Herramienta S.L.Spain
Technical specification
CategoryTurning (Automatics, Borers and Lathes)
MakeCUMBRE
ConditionUsed
LocationSpain
Description
Centre lathe Cumbre 30 of occasion
The Cumbre 30 is a centre lathe of bade with 1.000 mm between points and 470 mm of diameter admitted on bade, according to our technical data sheet. It is a workshop machine for the machining of axes, flanges and medium-sized pieces of revolution.
Data from the tab
Admit 535 mm on neckline and 260 mm on cart. The spindle hole is 42 mm, which allows the bar to pass that diameter, and the bench is 380 mm wide. The turning speeds range from 29 to 1.500 rpm, operated by a main engine of 10 CV.
Configuration of this unit
Brand and model: Cumbre 30
Distance between points: 1.000 mm; spindle hole: 42 mm
Diameter on deck: 470 mm; on neckline: 535 mm; on car: 260 mm
Bank width: 380 mm; speeds: 29 to 1.500 rpm
Main engine: 10 CV; weight: 2.300 kg
Three-claw chuck and tailstock (visible in the photos)
Typical applications
Machining of loose parts and short series, repair and maintenance, school-workshops and general mechanics workshops.
See in Ferrotall
The lathe is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.

Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.

Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-cumbre-30