









Lathe Castor 150
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
Small size centre lathe
centre lathe Castor 150 with 1.000 mm between points according to our tab, mounted on wardrobe. The head caratula is "Castor-150." It is a compact size lathe for small and medium parts. The figure 150 is part of the name of the model; the actual turning is not recorded in our tab.
Strong points of the type of machine
A lathe of this size occupies little space, is easy to handle and serves maintenance, prototypes and training. The front of the head, the front of the front of the head, and the bottom of the cabinet provide room for accessories.
Configuration of this unit
Brand and model: Castor 150 (caratula del head)
Distance between points: 1.000 mm
Three-claw chuck, quick-change tool holder and tailstock
Botonera with emergency push on the head
Base cabinet with doors
Typical applications
Turing of small pieces, axes and casings; repair and machining of prototypes in maintenance workshops and training centres.
See in Ferrotall
The lathe is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
centre lathe Castor 150 with 1.000 mm between points according to our tab, mounted on wardrobe. The head caratula is "Castor-150." It is a compact size lathe for small and medium parts. The figure 150 is part of the name of the model; the actual turning is not recorded in our tab.
Strong points of the type of machine
A lathe of this size occupies little space, is easy to handle and serves maintenance, prototypes and training. The front of the head, the front of the front of the head, and the bottom of the cabinet provide room for accessories.
Configuration of this unit
Brand and model: Castor 150 (caratula del head)
Distance between points: 1.000 mm
Three-claw chuck, quick-change tool holder and tailstock
Botonera with emergency push on the head
Base cabinet with doors
Typical applications
Turing of small pieces, axes and casings; repair and machining of prototypes in maintenance workshops and training centres.
See in Ferrotall
The lathe is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/torno-castor-150
