





Kondia milling machine
Technical specification
| Category | Milling machines |
| Make | KONDIA |
| Condition | Used |
| Location | Spain |
Description
Kondia turret milling machine
Conventional turret milling machine (knee type with ram) from the manufacturer Kondia, of Elgoibar (Gipuzkoa). It is one of the most common machines in maintenance shops, die making, prototyping and vocational training, suited to small and medium-sized parts and a variety of milling and drilling work.
Key strengths
Kondia turret milling machines are characterised by a vertical head mounted on a swivelling ram, which allows the spindle to be positioned over different areas of the table and tilted for angled work. The spindle with sliding quill makes drilling and reaming easier without moving the knee.
Configuration of this unit
Make: Kondia (labelled on head and column, photos 1, 2 and 5)
Vertical head with 8 speeds: 70, 125, 200, 300, 570, 950, 1,600 and 2,500 rpm (head plate, photo 5)
Ram on turret (photos 3 and 4)
T-slot table on knee (photos 1 and 4)
Transparent protective screen on the spindle (photos 2 and 4)
Typical applications
Face milling and slotting of small parts, coordinate drilling, pockets, making tooling and repairs in maintenance shops, die-making shops and training centres.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Conventional turret milling machine (knee type with ram) from the manufacturer Kondia, of Elgoibar (Gipuzkoa). It is one of the most common machines in maintenance shops, die making, prototyping and vocational training, suited to small and medium-sized parts and a variety of milling and drilling work.
Key strengths
Kondia turret milling machines are characterised by a vertical head mounted on a swivelling ram, which allows the spindle to be positioned over different areas of the table and tilted for angled work. The spindle with sliding quill makes drilling and reaming easier without moving the knee.
Configuration of this unit
Make: Kondia (labelled on head and column, photos 1, 2 and 5)
Vertical head with 8 speeds: 70, 125, 200, 300, 570, 950, 1,600 and 2,500 rpm (head plate, photo 5)
Ram on turret (photos 3 and 4)
T-slot table on knee (photos 1 and 4)
Transparent protective screen on the spindle (photos 2 and 4)
Typical applications
Face milling and slotting of small parts, coordinate drilling, pockets, making tooling and repairs in maintenance shops, die-making shops and training centres.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/kondia-milling-machine
