MachineDeal by EAMTM · International marketplace for used machine toolsEN · DE · FR · NL · PL · ES · ITDealersEAMTMMember login
EAMTM logo
MachineDealPowered by EAMTM
List your machines
Home / Metal forming / Shears / Ironworker Gairu

Ironworker Gairu

✓ Listed by Ferrotall Maquinas Herramienta S.L.Spain
Technical specification
CategoryShears
MakeGAIRU
ConditionUsed
LocationSpain
Description
What it is
Combined shearing and punching machine from Gairu, with a cast-iron frame, flywheels and mechanical drive. It is used for cutting sheet, flat bar, sections and round bar in steel, and for punching sheet with the appropriate attachments.
Key strengths
The specification sign fixed to the machine itself lists the manufacturer's cutting capacities. It is a very widely used machine in metalwork and plate fabrication because of its versatility: a single machine covers several section cutting operations.
Configuration of this unit
Shearing capacity for steel sheet up to 16 mm (data sheet and sign)
Sign: flat bar 60 x 25 mm and 100 x 18 mm in a single stroke; angles up to 85 x 13 mm; round bar up to 36 mm; square bar up to 30 mm
With special attachments, according to the sign: angles, U-channels, joists and round bar up to 45 mm, punching and blanking of sheet
Two flywheels and motor mounted on the frame
Cast-iron pedestal
Typical applications
Metalwork, architectural metalwork, plate fabrication and structural steel shops where flat bar, angles, round bar and sections are cut and sheet is punched.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.

Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/ironworker-gairu