






Inlasa 320x1500 lathe
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | INLASA |
| Condition | Used |
| Location | Spain |
Description
Inlasa 320x1500 centre lathe
Conventional centre lathe for machining shafts, flanges, bushings, pulleys and medium and large diameter parts of revolution. With 1,500 mm between centres and a 640 mm swing over bed, it covers a good part of the daily work of a general machining or maintenance shop.
Key strengths
The gap bed allows a swing of up to 965 mm next to the chuck, useful for large-diameter discs and short flanges. The 52 mm spindle bore takes bar of that diameter through the headstock. As can be seen in the photos, the screw-cutting gearbox includes charts for metric, inch and module threads.
Configuration of this unit
Distance between centres: 1,500 mm
Swing over bed: 640 mm
Swing over gap: 965 mm
Swing over cross slide: 420 mm
Spindle bore diameter: 52 mm
Three-jaw chuck (photos 1 and 3)
Four-position square toolpost turret (photos 1 and 3)
Tailstock (photo 3)
Coolant with articulated hose (photos 2 and 6)
Metric, inch and module threading charts (photo 4)
Overall dimensions: 3,000 x 1,000 x 1,400 mm
Typical applications
Repair and manufacture of shafts, threads, flanges, pulleys and bushings in industrial, agricultural or marine maintenance workshops, one-off parts and short runs.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can come and see it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Conventional centre lathe for machining shafts, flanges, bushings, pulleys and medium and large diameter parts of revolution. With 1,500 mm between centres and a 640 mm swing over bed, it covers a good part of the daily work of a general machining or maintenance shop.
Key strengths
The gap bed allows a swing of up to 965 mm next to the chuck, useful for large-diameter discs and short flanges. The 52 mm spindle bore takes bar of that diameter through the headstock. As can be seen in the photos, the screw-cutting gearbox includes charts for metric, inch and module threads.
Configuration of this unit
Distance between centres: 1,500 mm
Swing over bed: 640 mm
Swing over gap: 965 mm
Swing over cross slide: 420 mm
Spindle bore diameter: 52 mm
Three-jaw chuck (photos 1 and 3)
Four-position square toolpost turret (photos 1 and 3)
Tailstock (photo 3)
Coolant with articulated hose (photos 2 and 6)
Metric, inch and module threading charts (photo 4)
Overall dimensions: 3,000 x 1,000 x 1,400 mm
Typical applications
Repair and manufacture of shafts, threads, flanges, pulleys and bushings in industrial, agricultural or marine maintenance workshops, one-off parts and short runs.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can come and see it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/inlasa-320x1500-lathe
