






Hydraulic press Tianduan mod. YTC34-500
Technical specification
| Category | Hydraulic Presses |
| Make | TIANDUAN |
| Condition | Used |
| Location | Spain |
Description
Used Tianduan YTC34-500 hydraulic press
The YTC34-500 is a large frame-type hydraulic press with a 5,500 x 3,000 mm table, for stamping, drawing and die spotting of large sheet metal parts or assemblies. The plate on this unit states the manufacturer as Tianjin Tianduan Press Co., Ltd. and the year as 2017.
Tianjin Tianduan Press is a Chinese manufacturer of high-tonnage hydraulic presses. The control console of this press has a screen and push buttons, and according to its plate the machine has an upper cushion.
Configuration of this unit
Model: YTC34-500 (plate), serial 001
Year of manufacture: 2017
Capacity: 5,000 kN, maximum working pressure 250 bar
Slide stroke: 1,800 mm; max. daylight between table and slide: 2,000 mm
Worktable: 5,500 x 3,000 mm
Upper cushion 3,960 x 1,860 mm, force 1,000 kN and stroke 180 mm
Electrical power 59 kW, 380 V and 50 Hz
Total weight: 185,000 kg
Control console with screen
Typical applications
Stamping and drawing of large sheet metal parts, forming of large components, tooling adjustment and die try-out in large workshops and industrial plants.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The YTC34-500 is a large frame-type hydraulic press with a 5,500 x 3,000 mm table, for stamping, drawing and die spotting of large sheet metal parts or assemblies. The plate on this unit states the manufacturer as Tianjin Tianduan Press Co., Ltd. and the year as 2017.
Tianjin Tianduan Press is a Chinese manufacturer of high-tonnage hydraulic presses. The control console of this press has a screen and push buttons, and according to its plate the machine has an upper cushion.
Configuration of this unit
Model: YTC34-500 (plate), serial 001
Year of manufacture: 2017
Capacity: 5,000 kN, maximum working pressure 250 bar
Slide stroke: 1,800 mm; max. daylight between table and slide: 2,000 mm
Worktable: 5,500 x 3,000 mm
Upper cushion 3,960 x 1,860 mm, force 1,000 kN and stroke 180 mm
Electrical power 59 kW, 380 V and 50 Hz
Total weight: 185,000 kg
Control console with screen
Typical applications
Stamping and drawing of large sheet metal parts, forming of large components, tooling adjustment and die try-out in large workshops and industrial plants.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/hydraulic-press-tianduan-mod-ytc34-500
