








Hydraulic press Mecamaq DE 150
Technical specification
| Category | Hydraulic Presses |
| Make | MECAMAQ |
| Condition | Used |
| Location | Spain |
Description
Press Hydraulic Mecamaq DE 150
The DE 150 is a press hydraulic frame press tons manufactured by Mecamaq S.L. (Golmés, Lleida) in 1998, according to its plate. It is used in workshop for straightening, adjustment of bearings and casings, forming and assembly of heavy parts.
Strengths
It is a press frame with table adjustable in height, with a distance between plates from 230 to 830 mm according to our tab, which covers parts of very different heights. The plate warns not to exceed the travel end marks of the piston and the spindle. (Z2Z.)
Configuration of this unit
Model: 150 (plate), 98381 machine No
Year of construction: 1998
Force: 150 tonnes
Max. pressure: 400 (plate; non-legible unit)
Engine: 4 HP, 380 V, 50 Hz
Minimum and maximum distance between plates: 230 / 830 mm
External measures: 1.100 x 1.590 x 2.300 mm; weight: 1.300 kg
Table adjustable in height with chain and handle
Typical applications
axes straightening and profiles, bearing plating and extraction, pressure assembly, light stamping and industrial maintenance.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The DE 150 is a press hydraulic frame press tons manufactured by Mecamaq S.L. (Golmés, Lleida) in 1998, according to its plate. It is used in workshop for straightening, adjustment of bearings and casings, forming and assembly of heavy parts.
Strengths
It is a press frame with table adjustable in height, with a distance between plates from 230 to 830 mm according to our tab, which covers parts of very different heights. The plate warns not to exceed the travel end marks of the piston and the spindle. (Z2Z.)
Configuration of this unit
Model: 150 (plate), 98381 machine No
Year of construction: 1998
Force: 150 tonnes
Max. pressure: 400 (plate; non-legible unit)
Engine: 4 HP, 380 V, 50 Hz
Minimum and maximum distance between plates: 230 / 830 mm
External measures: 1.100 x 1.590 x 2.300 mm; weight: 1.300 kg
Table adjustable in height with chain and handle
Typical applications
axes straightening and profiles, bearing plating and extraction, pressure assembly, light stamping and industrial maintenance.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/prensa-hidraulica-mecamaq-de-150
