




Hydraulic press Camp 100 t
Technical specification
| Category | Hydraulic Presses |
| Make | CAMP |
| Condition | Used |
| Location | Spain |
Description
What is it?
press hydraulic 100 t closed frame structure (frame) with T-slot table 410 x 535 mm, for straightening, bearing and casing, pressure assembly and light assembly of workshop parts.
Strengths
In the photos you can see the cylinder on the table, the manometer on the frame and a separate hydraulic power plant with electric motor and electrovalves.
Configuration of this unit
Mark: Camp (plate on the frame)
Capacity: 100 t (our tab)
Table: 410 x 535 mm with T-slots
Pressure gauge in the frame
Hydraulic power station with motor and distributors, independent of the frame
Botonera with automatic / manual selector, up, down, running and stop; foot pedal at base
External measurements: 1.290 x 1.400 x 2.280 mm
Typical applications
Filling and extraction of bearings, casings and axes, straightening of parts, mounting to pressure, forming and industrial maintenance work in workshop.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
press hydraulic 100 t closed frame structure (frame) with T-slot table 410 x 535 mm, for straightening, bearing and casing, pressure assembly and light assembly of workshop parts.
Strengths
In the photos you can see the cylinder on the table, the manometer on the frame and a separate hydraulic power plant with electric motor and electrovalves.
Configuration of this unit
Mark: Camp (plate on the frame)
Capacity: 100 t (our tab)
Table: 410 x 535 mm with T-slots
Pressure gauge in the frame
Hydraulic power station with motor and distributors, independent of the frame
Botonera with automatic / manual selector, up, down, running and stop; foot pedal at base
External measurements: 1.290 x 1.400 x 2.280 mm
Typical applications
Filling and extraction of bearings, casings and axes, straightening of parts, mounting to pressure, forming and industrial maintenance work in workshop.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/prensa-hidraulica-camp-100-tn
