




Honing machine Samel
Technical specification
| Category | Grinding, Honing and Polishing |
| Make | SAMEL |
| Condition | Used |
| Location | Spain |
Description
Samel honing machine
Samel honing machine, made by Industria Sala Melero (Barcelona) according to the lettering on the front, for finishing cylindrical bores with honing stones.
Markings on the front
The front panel of this unit carries tables for selecting speeds and pressures according to bore diameter, and stones according to surface roughness and the material to be machined.
Configuration of this unit
Front panel with pressure gauge, two control knobs and operating lever.
Honing spindle in the centre of the front panel.
Belt drive with stepped pulleys inside.
Collecting tray with grid and lower cabinet.
Plate on the front with serial number and type left blank.
Surface rust, dust and worn paint visible on the tray and drive; the actual condition cannot be assessed from the photos.
Typical applications
Finishing cylinder liners, bushes, pump bodies and other bores that require precision and controlled surface roughness.
See it at Ferrotall
The honing machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Samel honing machine, made by Industria Sala Melero (Barcelona) according to the lettering on the front, for finishing cylindrical bores with honing stones.
Markings on the front
The front panel of this unit carries tables for selecting speeds and pressures according to bore diameter, and stones according to surface roughness and the material to be machined.
Configuration of this unit
Front panel with pressure gauge, two control knobs and operating lever.
Honing spindle in the centre of the front panel.
Belt drive with stepped pulleys inside.
Collecting tray with grid and lower cabinet.
Plate on the front with serial number and type left blank.
Surface rust, dust and worn paint visible on the tray and drive; the actual condition cannot be assessed from the photos.
Typical applications
Finishing cylinder liners, bushes, pump bodies and other bores that require precision and controlled surface roughness.
See it at Ferrotall
The honing machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/honing-machine-samel
