Home / Metal cutting / Turning (Automatics, Borers and Lathes) / HEY No 3 Automatic facing and centering machine with auto feed










HEY No 3 Automatic facing and centering machine with auto feed
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Condition | Used |
| Location | United Kingdom |
Description
MAKE:
HEY
CATEGORY:
Facing/Milling and Centering Machines
PHOTO GALLERYENQUIRE NOW
Machine Overview
USED HEY NO. 3 46” AUTOMATIC DOUBLE ENDED FACING AND CENTERING MACHINE W/ AUTOMATIC FEED
FEATURES
Serial No. 2824-736
Maximum diameter of work: 6.25”
Minimum diameter of work: .25”
Maximum workpiece length: 46”
Minimum length of work: 3”
Maximum swing over bed: 21”
Spindle speeds: 67 to 1430 RPM in 18 steps
(change gears to produce (1) RPM rate will be supplied with machine)
Length of fine adjustment to cutter: 2”
Feed rates in mm per rev. of spindle:
(4) steps 0.015 to 0.070
Rapid traverse rate: 250”/min.
(2) Pneumatic work hold vises
Spindle drives – 5.5 kW each
Electrics: 3/50/220/380/420
Automatic Functions:
Auto feed of work via adjustable walking beam conveyor.
Auto positioning of work prior to machining w/ inspection of overall length.
Auto inspection of work after machining.
Auto stopping of machine in case of detection of incorrect work.
(1) Pair of combination facing and centering cutter bodies to be
Supplied with machine.
Other Details:
Chip Conveyor
Coolant System
Weight: 12,500 lbs
Dimensions: FB X RL – 84” X 128”
Height: 70”
DISCLAIMER
NB.The above information has been obtained with care to the best of our ability. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term.
Prospective purchasers are advised to check any vital details.
Complete Health and Safety Act, April 1st 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with the requirements of the act with respect to guarding etc.
We would like to remind prospective purchasers to ensure that a guarding specialist or their own health and safety officers inspect the goods prior to use.
Photo Gallery
HEY
CATEGORY:
Facing/Milling and Centering Machines
PHOTO GALLERYENQUIRE NOW
Machine Overview
USED HEY NO. 3 46” AUTOMATIC DOUBLE ENDED FACING AND CENTERING MACHINE W/ AUTOMATIC FEED
FEATURES
Serial No. 2824-736
Maximum diameter of work: 6.25”
Minimum diameter of work: .25”
Maximum workpiece length: 46”
Minimum length of work: 3”
Maximum swing over bed: 21”
Spindle speeds: 67 to 1430 RPM in 18 steps
(change gears to produce (1) RPM rate will be supplied with machine)
Length of fine adjustment to cutter: 2”
Feed rates in mm per rev. of spindle:
(4) steps 0.015 to 0.070
Rapid traverse rate: 250”/min.
(2) Pneumatic work hold vises
Spindle drives – 5.5 kW each
Electrics: 3/50/220/380/420
Automatic Functions:
Auto feed of work via adjustable walking beam conveyor.
Auto positioning of work prior to machining w/ inspection of overall length.
Auto inspection of work after machining.
Auto stopping of machine in case of detection of incorrect work.
(1) Pair of combination facing and centering cutter bodies to be
Supplied with machine.
Other Details:
Chip Conveyor
Coolant System
Weight: 12,500 lbs
Dimensions: FB X RL – 84” X 128”
Height: 70”
DISCLAIMER
NB.The above information has been obtained with care to the best of our ability. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term.
Prospective purchasers are advised to check any vital details.
Complete Health and Safety Act, April 1st 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with the requirements of the act with respect to guarding etc.
We would like to remind prospective purchasers to ensure that a guarding specialist or their own health and safety officers inspect the goods prior to use.
Photo Gallery
Imported from the Major Machine Tools Ltd stock feed (https://majormachinetools.com/sitemap.xml). Source listing: https://majormachinetools.com/hey-no-3-automatic-facing-and-centering-machine-with-auto-feed/
