Home / Metal cutting / Turning (Automatics, Borers and Lathes) / HEY NO. 3 8” X 27” AUTOMATIC CNC FACING AND CENTERING MACHINE










HEY NO. 3 8” X 27” AUTOMATIC CNC FACING AND CENTERING MACHINE
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Condition | Used |
| Location | United Kingdom |
Description
MAKE:
HEY
YEAR:
1999
CATEGORY:
Facing/Milling and Centering Machines
PHOTO GALLERYENQUIRE NOW
Machine Overview
USED 8 ½” X 27” HEY No 3 CNC AUTOMATIC FACING AND CENTERING MACHINE
Serial No. 2824-1001
FEATURES
Maximum work length: 27”
Maximum diameter held in vises: 8 ½”
Maximum cutter diameter: 6.3” (160 mm)
Spindle speed range: 200 – 1200 R.P.M.
Feed stroke of heads: Total – 3”, Feed – 2”
Feed box ratio: 165:1
Feed rates-infinitely variable: 0 to .018”/rev.
Equipped with:
Full machine enclosure w/ Light Guard
Automatic retracting end stop
15 HP AC spindle motors 3/60/230-460 VAC
Self centering air vises – variable pressure
Automatic/manual mode selection
(2) Cutter Body Heads
Heidenhain DRO on LH head
AC feed servo motor
Coolant System
Trabon automatic lube system
Worklight
Chip Conveyor
Electrical controls:
Allen Bradley Panelview 900 LCD display and controller
AB Model 1336 constant torque AC spindle drives for individual motor control
AB Model 1394 AC Servo control system for feed/rapid drive
AB SLC 5/04 programmable controller with memory card and software
Electrics: 415 Volt, 3 Phase, 50 Cycle
Approximate floor space: 12’ L X 76” deep X 92” high
Approximate weight: 8,000lbs.
DISCLAIMER
NB.The above information has been obtained with care to the best of our ability. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term.
Prospective purchasers are advised to check any vital details.
Complete Health and Safety Act, April 1st 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with the requirements of the act with respect to guarding etc.
We would like to remind prospective purchasers to ensure that a guarding specialist or their own health and safety officers inspect the goods prior to use.
Photo Gallery
HEY
YEAR:
1999
CATEGORY:
Facing/Milling and Centering Machines
PHOTO GALLERYENQUIRE NOW
Machine Overview
USED 8 ½” X 27” HEY No 3 CNC AUTOMATIC FACING AND CENTERING MACHINE
Serial No. 2824-1001
FEATURES
Maximum work length: 27”
Maximum diameter held in vises: 8 ½”
Maximum cutter diameter: 6.3” (160 mm)
Spindle speed range: 200 – 1200 R.P.M.
Feed stroke of heads: Total – 3”, Feed – 2”
Feed box ratio: 165:1
Feed rates-infinitely variable: 0 to .018”/rev.
Equipped with:
Full machine enclosure w/ Light Guard
Automatic retracting end stop
15 HP AC spindle motors 3/60/230-460 VAC
Self centering air vises – variable pressure
Automatic/manual mode selection
(2) Cutter Body Heads
Heidenhain DRO on LH head
AC feed servo motor
Coolant System
Trabon automatic lube system
Worklight
Chip Conveyor
Electrical controls:
Allen Bradley Panelview 900 LCD display and controller
AB Model 1336 constant torque AC spindle drives for individual motor control
AB Model 1394 AC Servo control system for feed/rapid drive
AB SLC 5/04 programmable controller with memory card and software
Electrics: 415 Volt, 3 Phase, 50 Cycle
Approximate floor space: 12’ L X 76” deep X 92” high
Approximate weight: 8,000lbs.
DISCLAIMER
NB.The above information has been obtained with care to the best of our ability. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term.
Prospective purchasers are advised to check any vital details.
Complete Health and Safety Act, April 1st 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with the requirements of the act with respect to guarding etc.
We would like to remind prospective purchasers to ensure that a guarding specialist or their own health and safety officers inspect the goods prior to use.
Photo Gallery
Imported from the Major Machine Tools Ltd stock feed (https://majormachinetools.com/sitemap.xml). Source listing: https://majormachinetools.com/hey-no-3-8-x-27-automatic-cnc-facing-and-centering-machine/
