






Grinding machine Danobat RE800A
Technical specification
| Category | Grinders |
| Make | DANOBAT |
| Condition | Used |
| Location | Spain |
Description
Cylindrical grinder Danobat RE-800 A
Universal cylindrical grinder to correct axes and pieces of revolution between points. The banner of the block of this unit says "Danobat," Gipuzcoan manufacturer of grinding machines. (Z3Z.)
According to an announcement from another RE-800 A unit (from 1969 in Resale), the model has 800 mm between points and rectifies up to 250 mm in diameter; these are data from that unit, not from ours. In the photos of this machine you can see a swivel head with chuck of claws and engine, and a head with engine.
Configuration of this unit
Model: RE-800 A (according to sheet and title)
Type: cylindrical
External measures: 2.300 x 1.700 x 1.700 mm (according to sheet)
head can be guided on a rotating basis with chuck claw
head carrier with engine
Control panel with push-and-stop and selector
"Danobat" heading on the bench
Typical applications
grinding axes, shell and cylindrical parts in general mechanics, utility and maintenance workshops.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Universal cylindrical grinder to correct axes and pieces of revolution between points. The banner of the block of this unit says "Danobat," Gipuzcoan manufacturer of grinding machines. (Z3Z.)
According to an announcement from another RE-800 A unit (from 1969 in Resale), the model has 800 mm between points and rectifies up to 250 mm in diameter; these are data from that unit, not from ours. In the photos of this machine you can see a swivel head with chuck of claws and engine, and a head with engine.
Configuration of this unit
Model: RE-800 A (according to sheet and title)
Type: cylindrical
External measures: 2.300 x 1.700 x 1.700 mm (according to sheet)
head can be guided on a rotating basis with chuck claw
head carrier with engine
Control panel with push-and-stop and selector
"Danobat" heading on the bench
Typical applications
grinding axes, shell and cylindrical parts in general mechanics, utility and maintenance workshops.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/rectificadora-danobat-re800a
