














Gleason Model 645 Hypoid Gear Generator
Technical specification
| Category | Gear Cutting |
| Model | 645 |
| Year | 1980 |
| Condition | Used |
| Location | Melville, New York, United States |
| Model | 645 |
| Age | 1980 |
| Ref# | 31071 |
| Feature | Stock Divider |
| Feature | Chip Auger |
| Feature | Hydraulic System |
| Feature | Coolant |
| Feature | Bridgeport, CT |
Description
SPECIFICATIONS:
Outer Core
14.22", 14.05", 14.88"
Spiral Angle
29.75", 30 Deg, 35 Deg.
Cutter Diameter
12", 16", 18"
Extreme Ratio
10:1
Root Angle Range
-8/+90 Degree
Maximum Radial Setting
10.50"
Coarsest Pitch
1.5 DP
Full Depth
1.25"
Face Width Max.
4.60"
Index Range
5-80 Inclusive
Work Spindle, Dia. Of Taper Hole
6" At Large End
Taper/Ft
3/4"
Taper/Depth
6"
Hole Through Spindle
5"
Cutter Diameter
9", 12", 16", 18"
Work Head Offset Above Center
4.5"
Work Head Offset Below Center
4.5"
Machine Center To Spindle Nose
23.5"
Cutter Speeds/Feeds
19-167 RPM
Electrics
460V
Weight
55,000 Lbs.
Stock Divider
Chip Auger
Hydraulic System
Coolant
Bridgeport, CT
Outer Core
14.22", 14.05", 14.88"
Spiral Angle
29.75", 30 Deg, 35 Deg.
Cutter Diameter
12", 16", 18"
Extreme Ratio
10:1
Root Angle Range
-8/+90 Degree
Maximum Radial Setting
10.50"
Coarsest Pitch
1.5 DP
Full Depth
1.25"
Face Width Max.
4.60"
Index Range
5-80 Inclusive
Work Spindle, Dia. Of Taper Hole
6" At Large End
Taper/Ft
3/4"
Taper/Depth
6"
Hole Through Spindle
5"
Cutter Diameter
9", 12", 16", 18"
Work Head Offset Above Center
4.5"
Work Head Offset Below Center
4.5"
Machine Center To Spindle Nose
23.5"
Cutter Speeds/Feeds
19-167 RPM
Electrics
460V
Weight
55,000 Lbs.
Stock Divider
Chip Auger
Hydraulic System
Coolant
Bridgeport, CT
Imported from the Prestige Equipment Corporation stock feed (https://www.prestigeequipment.com/r2d_inc/inc_searchresults.php). Source listing: https://www.prestigeequipment.com/Gear-Generators-Bevel-Spiral-Hypoid/Gleason-645/31071/i
