







Gantry milling machine Bermaq CR114
Technical specification
| Category | Machining centres |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
Milling machine of portico Bermaq CR114
The Bermaq CR114 is a large-format milling machine portico, with 2.500 x 2.500 mm table, 2.500 x 2.500 x 1.200 mm and spindle up to 24.000 rpm, according to our data sheet.
Strengths
The portico configuration with a fixed table of this size and a high-speed spindle is the usual in the milling of models, mold and large-format parts in soft materials. The control is a Selca S3045P, with alphanumeric keyboard and head. speed and advance controls (Z3Z.)
Configuration of this unit
"BERMAQ CR 'heading in the portico; year 1997
Selca S3045P control
2.500 x 2.500 mm table; X 2.500, Y 2.500, Z 1.200 mm tours
ISO 30 cone; spindle speed up to 24.000 rpm
No tool changer, no chip extractor and no cooling through the tool
External measurements 6.650 x 5.000 x 4.400 mm; weight 12.500 kg
Typical applications
Milling of models, moulds, technical foams, resins and large parts in non-ferrous materials.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Bermaq CR114 is a large-format milling machine portico, with 2.500 x 2.500 mm table, 2.500 x 2.500 x 1.200 mm and spindle up to 24.000 rpm, according to our data sheet.
Strengths
The portico configuration with a fixed table of this size and a high-speed spindle is the usual in the milling of models, mold and large-format parts in soft materials. The control is a Selca S3045P, with alphanumeric keyboard and head. speed and advance controls (Z3Z.)
Configuration of this unit
"BERMAQ CR 'heading in the portico; year 1997
Selca S3045P control
2.500 x 2.500 mm table; X 2.500, Y 2.500, Z 1.200 mm tours
ISO 30 cone; spindle speed up to 24.000 rpm
No tool changer, no chip extractor and no cooling through the tool
External measurements 6.650 x 5.000 x 4.400 mm; weight 12.500 kg
Typical applications
Milling of models, moulds, technical foams, resins and large parts in non-ferrous materials.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/fresadora-portico-bermaq-cr114
