




















Film Center and FRAISAGE BUMOTEC S-191FTL-R
Technical specification
| Category | Machining centres |
| Condition | Used |
| Location | Switzerland |
| Type | S191FTL-R |
Description
Inventory no.2220114, machine comprising:
ORDER
Fanuc 30i/31i, with screen 14
ADOPTION BY LINEER MOTORS
For Y and Z axes
FUNCTION
With integration of an indexing system (8 position) to the spindle tool holder,
transformation of tool shop for tool holder HSK40-A,
increase in speed from spindle to 5500 Z23OUR (min-1)
CNC OPTIONS
for shooting operations: integration of shooting options into digital control, synchronization and correction Efforts for shooting tools
"PRM" PIECE REPRISE UNIT A 4 POSITIONS, FOR FACE 6EME USE:
In condition of inactivity, the unit is located at the shelter under the main spindle C1.
The recovery unit moves on the W axis, which is Eventually parallel to the C axis.
Maximum speed W axis: 40 m/min.
Move on W axis: 310 mm.
With
2 vices – power at 5 bar : 3500N
1 tailstock
Increase in spindle PASSAGE
increase from 1 to 50 mm (main spindle)
RENISHAW MEASUREMENT DEPOSITED T27
Measuring the length of the turning tool.
Routine detection by M-code.
Automatic tool breaker control.
MAGASIN EXTENSION
Tool capacity increase from 30 to 60 posts
Max tool length: 130 mm / max diameter: Ø 80 mm.
Max tool weight: 1.3 kg.
LIQUID REFRIDING TO THE spindle
100 bar, 25 L/min, 400L tank
ADAPTATION AND PREPARATION HP TO TRAVEL THE COSTING spindle
Mechanical and electrical integration of turning clutch.
spindle REDUCTIONS
1x Ø 12.0 mm., 1x Ø 24.0 mm, 1x Ø 36.0 mm
PIES RECOVERY
With 2 baskets replenishment
BAND OF PIECES
Left exit of machine
Adjustable advances
PAPER BAND FILTRATION SYSTEM
F-48 PINCES SERRY SYSTEM
ADAPTATION FOR W-20 PINCES
PREPARATION FOR INTEGRATION
Origin of manufacture CH
Voltage 3/N/PE/400V/230V 50HZ
Dimensions 205x220x250 cm
Net machine weight env.4200 kg
TECHNICAL CHARACTERISTICS
MACHINE BASE
travel axis Z = 400 mm
Y = 200 mm
X = 410 mm
Power / thrust force
Z-Y 2.5 kW / 550 daN
(linear engine option =7.2 kW/350 daN)
X 4.8 kW / > 550 daN
Travel speed X-Y-Z 40 m/min
(linear engine option = 50 m/min) Tunnel
Acceleration X-Y-Z-W 8 m/s2 / 0.8 g
(linear engine option =10.4 m/s2 /1.1g)
Resolution X-Y-Z-W 0.0001 mm
spindle MAIN + C1
Power 7,5 kW
Couple/ tip 22 / 28 Nm
Direct measurement system
Resolution 0.0001°
Precision 0.001°
Bar passage Ø 32 mm
Rotating speed turning 72000°/min
Clamping force, turning 4 (900, 6)
AXE B (AXE spindle PORT TOOL INCLINION)
Power 4.3 kW
Couple/ tip 119 / 226 Nm
Angular range -25° / +115°
Direct measurement system
Resolution 0.0001°
Precision 0.001°
Rotation speed 36-000°/min
Support couple 200 Nm
spindle PORT-OUTIL
Power 5 kW
Couple 6 to 800 min-1
Max speed 30EEP000 min-1
Clamping force cup 2000 N
Mechanical locking torque by right tooth
Tool socket cone HSK 40 (A or E)
Tool clamping power 1000 DaN
Lubrication in the centre of tool 30 at 80 bar (option)
TOOL CHANGER
Number of positions 30 (for HSK 40)
Tool change time 1.2 dry.
Dry 3.4 shaving time.
Max tool diameter Ø 40 mm
(80 mmKING if adjacent empty position)
Max tool length 130 mm
Max tool weight 1.5 kg
CNC command type Fanuc 30i/31i
Installed power 25 kVA
Linear Engine Training Option »
Y axis (transverse axis)
travel 200 mm
Power 4.8 kW
Forward power 240 daN
Resolution 0.0001 mm
Max. G0 50 m/min
Max. G1 20 m/min Solicitor General
Glass rule measuring system
Z axis (longitudinal axis)
travel 400 mm
Power 7.2 kW
Forward power Z130 counterpart (360)
Resolution 0.0001 mm
Max. G0 50 m/min
Max. G1 20 m/min
Glass rule measuring system
Included cooling apparatus 8 kW
And integration of an emergency shutdown system.
If there is no error or Aren't any omission, the technical information is given to you without obligation.
ORDER
Fanuc 30i/31i, with screen 14
ADOPTION BY LINEER MOTORS
For Y and Z axes
FUNCTION
With integration of an indexing system (8 position) to the spindle tool holder,
transformation of tool shop for tool holder HSK40-A,
increase in speed from spindle to 5500 Z23OUR (min-1)
CNC OPTIONS
for shooting operations: integration of shooting options into digital control, synchronization and correction Efforts for shooting tools
"PRM" PIECE REPRISE UNIT A 4 POSITIONS, FOR FACE 6EME USE:
In condition of inactivity, the unit is located at the shelter under the main spindle C1.
The recovery unit moves on the W axis, which is Eventually parallel to the C axis.
Maximum speed W axis: 40 m/min.
Move on W axis: 310 mm.
With
2 vices – power at 5 bar : 3500N
1 tailstock
Increase in spindle PASSAGE
increase from 1 to 50 mm (main spindle)
RENISHAW MEASUREMENT DEPOSITED T27
Measuring the length of the turning tool.
Routine detection by M-code.
Automatic tool breaker control.
MAGASIN EXTENSION
Tool capacity increase from 30 to 60 posts
Max tool length: 130 mm / max diameter: Ø 80 mm.
Max tool weight: 1.3 kg.
LIQUID REFRIDING TO THE spindle
100 bar, 25 L/min, 400L tank
ADAPTATION AND PREPARATION HP TO TRAVEL THE COSTING spindle
Mechanical and electrical integration of turning clutch.
spindle REDUCTIONS
1x Ø 12.0 mm., 1x Ø 24.0 mm, 1x Ø 36.0 mm
PIES RECOVERY
With 2 baskets replenishment
BAND OF PIECES
Left exit of machine
Adjustable advances
PAPER BAND FILTRATION SYSTEM
F-48 PINCES SERRY SYSTEM
ADAPTATION FOR W-20 PINCES
PREPARATION FOR INTEGRATION
Origin of manufacture CH
Voltage 3/N/PE/400V/230V 50HZ
Dimensions 205x220x250 cm
Net machine weight env.4200 kg
TECHNICAL CHARACTERISTICS
MACHINE BASE
travel axis Z = 400 mm
Y = 200 mm
X = 410 mm
Power / thrust force
Z-Y 2.5 kW / 550 daN
(linear engine option =7.2 kW/350 daN)
X 4.8 kW / > 550 daN
Travel speed X-Y-Z 40 m/min
(linear engine option = 50 m/min) Tunnel
Acceleration X-Y-Z-W 8 m/s2 / 0.8 g
(linear engine option =10.4 m/s2 /1.1g)
Resolution X-Y-Z-W 0.0001 mm
spindle MAIN + C1
Power 7,5 kW
Couple/ tip 22 / 28 Nm
Direct measurement system
Resolution 0.0001°
Precision 0.001°
Bar passage Ø 32 mm
Rotating speed turning 72000°/min
Clamping force, turning 4 (900, 6)
AXE B (AXE spindle PORT TOOL INCLINION)
Power 4.3 kW
Couple/ tip 119 / 226 Nm
Angular range -25° / +115°
Direct measurement system
Resolution 0.0001°
Precision 0.001°
Rotation speed 36-000°/min
Support couple 200 Nm
spindle PORT-OUTIL
Power 5 kW
Couple 6 to 800 min-1
Max speed 30EEP000 min-1
Clamping force cup 2000 N
Mechanical locking torque by right tooth
Tool socket cone HSK 40 (A or E)
Tool clamping power 1000 DaN
Lubrication in the centre of tool 30 at 80 bar (option)
TOOL CHANGER
Number of positions 30 (for HSK 40)
Tool change time 1.2 dry.
Dry 3.4 shaving time.
Max tool diameter Ø 40 mm
(80 mmKING if adjacent empty position)
Max tool length 130 mm
Max tool weight 1.5 kg
CNC command type Fanuc 30i/31i
Installed power 25 kVA
Linear Engine Training Option »
Y axis (transverse axis)
travel 200 mm
Power 4.8 kW
Forward power 240 daN
Resolution 0.0001 mm
Max. G0 50 m/min
Max. G1 20 m/min Solicitor General
Glass rule measuring system
Z axis (longitudinal axis)
travel 400 mm
Power 7.2 kW
Forward power Z130 counterpart (360)
Resolution 0.0001 mm
Max. G0 50 m/min
Max. G1 20 m/min
Glass rule measuring system
Included cooling apparatus 8 kW
And integration of an emergency shutdown system.
If there is no error or Aren't any omission, the technical information is given to you without obligation.
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/centre-de-tournage-et-fraisage-bumotec-s-191ftl-r/
