Home / Metal cutting / Turning (Automatics, Borers and Lathes) / F4006 COLCHESTER MASCOT 1600 X 80” GAP BED LATHE






F4006 COLCHESTER MASCOT 1600 X 80” GAP BED LATHE
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Condition | Used |
| Location | United Kingdom |
Description
Make: COLCHESTER MASCOT 1600 X 80” GAP BED LATHE
Model: Mascot 1600
Serial No 7/0205/1393,
Swing Over Bed 431mm,
Swing Over Saddle 266mm,
Swing in Gap 711mm,
Maximum distance Between Centres 2032mm,
Spindle Speeds 20 – 1600rpm,
Spindle Bore 74mm,
Feeds, Sliding 0.06 – 1mm/rev, Surfacing 0.03 – 0.5mm/rev,
Screw Cutting TPI 4 – 72, MOD 8 – 60, Metric 0.4 – 14mm pitch, DP 0.3 – 3.5,
Tailstock Taper 5MT,
Motor 12.5HP, Electrics 415v, 3ph, 50 Cycles,
Complete With 4 Jaw Chuck, Fixed 3 Point Steady, Taper Turning, 2 Axis DRO, Quick Change Tool Post & Tool Holders, Chuck Guard & Rear Splash Guard, Emergency Stop,
Approximate Dimensions 3500 x 1300 x 1500mm,
Approximate Weight 2500kg
Model: Mascot 1600
Serial No 7/0205/1393,
Swing Over Bed 431mm,
Swing Over Saddle 266mm,
Swing in Gap 711mm,
Maximum distance Between Centres 2032mm,
Spindle Speeds 20 – 1600rpm,
Spindle Bore 74mm,
Feeds, Sliding 0.06 – 1mm/rev, Surfacing 0.03 – 0.5mm/rev,
Screw Cutting TPI 4 – 72, MOD 8 – 60, Metric 0.4 – 14mm pitch, DP 0.3 – 3.5,
Tailstock Taper 5MT,
Motor 12.5HP, Electrics 415v, 3ph, 50 Cycles,
Complete With 4 Jaw Chuck, Fixed 3 Point Steady, Taper Turning, 2 Axis DRO, Quick Change Tool Post & Tool Holders, Chuck Guard & Rear Splash Guard, Emergency Stop,
Approximate Dimensions 3500 x 1300 x 1500mm,
Approximate Weight 2500kg
Imported from the Northern Machine Tools (Engineering) Ltd stock feed (https://nmteng.com/wp-json/wc/store/v1/products). Source listing: https://nmteng.com/product/f4006-colchester-mascot-1600-x-80-gap-bed-lathe/
