Home / Metal forming / Erosion, electrochemical and ultrasonic machines / EDM machine ONA Program-60




EDM machine ONA Program-60
Technical specification
| Category | Erosion, electrochemical and ultrasonic machines |
| Make | ONA |
| Condition | Used |
| Location | Spain |
Description
Used ONA die-sinking EDM
Die-sinking EDM machine from the Basque manufacturer ONA, for sinking cavities and engraving shapes with an electrode in hardened-steel moulds, dies and tooling.
What the photos show
The head carries the ONA Program marking and the generator is an ONAMATIC 60 with X, Y and Z digital readouts, numeric keypad and emergency stop. The number 360 appears on the side of the tank. The exact model name has yet to be confirmed, so we do not treat it as final. According to the ONAPROGRAM series catalogue, a column-type version with a 650 x 400 mm table and a 1,100 x 700 x 367 mm tank has the same dimensions as our data sheet, but that sheet does not identify this unit.
Configuration of this unit
ONA make, ONAPROGRAM series (exact model to be confirmed)
Type: die-sinking, semi-automatic drive (semi-control)
Table travels: 650 x 400 mm
Tank dimensions: 1,100 x 700 x 367 mm
Year: 1988
X, Y and Z digital readout on the ONAMATIC 60 generator
Typical applications
Moulds and dies, cavities with graphite or copper electrodes, removal of broken tools and shapes that cannot be produced by metal cutting.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Die-sinking EDM machine from the Basque manufacturer ONA, for sinking cavities and engraving shapes with an electrode in hardened-steel moulds, dies and tooling.
What the photos show
The head carries the ONA Program marking and the generator is an ONAMATIC 60 with X, Y and Z digital readouts, numeric keypad and emergency stop. The number 360 appears on the side of the tank. The exact model name has yet to be confirmed, so we do not treat it as final. According to the ONAPROGRAM series catalogue, a column-type version with a 650 x 400 mm table and a 1,100 x 700 x 367 mm tank has the same dimensions as our data sheet, but that sheet does not identify this unit.
Configuration of this unit
ONA make, ONAPROGRAM series (exact model to be confirmed)
Type: die-sinking, semi-automatic drive (semi-control)
Table travels: 650 x 400 mm
Tank dimensions: 1,100 x 700 x 367 mm
Year: 1988
X, Y and Z digital readout on the ONAMATIC 60 generator
Typical applications
Moulds and dies, cavities with graphite or copper electrodes, removal of broken tools and shapes that cannot be produced by metal cutting.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/edm-machine-ona-program-60
