Home / Metal forming / Erosion, electrochemical and ultrasonic machines / EDM machine ONA Compact 2 S/N 8127/9803







EDM machine ONA Compact 2 S/N 8127/9803
Technical specification
| Category | Erosion, electrochemical and ultrasonic machines |
| Make | ONA |
| Condition | Used |
| Location | Spain |
Description
ONA Compact 2 die-sinking EDM
ONA Compact 2 die-sinking EDM machine with the generator in a separate cabinet. It is used to machine cavities and shapes in hardened steel and is common in die making, mould making and tooling.
Configuration of this unit
Model: Compact 2 (marking on the bed and on the panel)
Type: die-sinking; drive: manual
Travels: 300 x 200 mm
Tank dimensions: 800 x 500 x 290 mm
Overall dimensions: 1,455 x 1,580 x 2,152 mm
Electrode changer: no
Generator in a separate cabinet with analogue meters
Control panel with current selectors, potentiometers and push buttons
Table handwheels and electrodes of various shapes next to the machine
Typical applications
Machining of cavities, forging dies, mould inserts and dies in hardened steel and carbide.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
ONA Compact 2 die-sinking EDM machine with the generator in a separate cabinet. It is used to machine cavities and shapes in hardened steel and is common in die making, mould making and tooling.
Configuration of this unit
Model: Compact 2 (marking on the bed and on the panel)
Type: die-sinking; drive: manual
Travels: 300 x 200 mm
Tank dimensions: 800 x 500 x 290 mm
Overall dimensions: 1,455 x 1,580 x 2,152 mm
Electrode changer: no
Generator in a separate cabinet with analogue meters
Control panel with current selectors, potentiometers and push buttons
Table handwheels and electrodes of various shapes next to the machine
Typical applications
Machining of cavities, forging dies, mould inserts and dies in hardened steel and carbide.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/edm-machine-ona-compact-2-s-n-8127-9803
