







EDM machine ONA Compac 30
Technical specification
| Category | Erosion, electrochemical and ultrasonic machines |
| Make | ONA |
| Condition | Used |
| Location | Spain |
Description
ONA Compact 30 die-sinking EDM
The ONA Compact 30 is a die-sinking EDM machine with column-type head and work tank. The panel bears the ONA Compact 30 marking. It is used to erode cavities in hardened-steel moulds, dies and tooling.
Key strengths
According to the model data sheet (manufacturer's catalogue), the Compact 30 offers a 550 x 350 mm table, 300 mm longitudinal travel, 200 mm cross travel, 200 mm electrode holder travel, 45 A current and 3.5 kVA maximum power. These are catalogue data for the model, not confirmed on this unit.
Configuration of this unit
Model: Compact 30
Tank dimensions (data sheet): 550 x 360 x 240 mm; weight: 570 kg
ONA control panel with push buttons and dial gauge
Typical applications
Eroding of mould cavities, stamping and press-tool dies, and repair of hardened-steel tooling.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The ONA Compact 30 is a die-sinking EDM machine with column-type head and work tank. The panel bears the ONA Compact 30 marking. It is used to erode cavities in hardened-steel moulds, dies and tooling.
Key strengths
According to the model data sheet (manufacturer's catalogue), the Compact 30 offers a 550 x 350 mm table, 300 mm longitudinal travel, 200 mm cross travel, 200 mm electrode holder travel, 45 A current and 3.5 kVA maximum power. These are catalogue data for the model, not confirmed on this unit.
Configuration of this unit
Model: Compact 30
Tank dimensions (data sheet): 550 x 360 x 240 mm; weight: 570 kg
ONA control panel with push buttons and dial gauge
Typical applications
Eroding of mould cavities, stamping and press-tool dies, and repair of hardened-steel tooling.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/edm-machine-ona-compac-30
