Home / Metal forming / Erosion, electrochemical and ultrasonic machines / EDM machine ONA B-230 Program






EDM machine ONA B-230 Program
Technical specification
| Category | Erosion, electrochemical and ultrasonic machines |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
What it is
ONA B-230 die-sinking EDM machine with ONA Program 30 control. It is used to machine cavities and shapes in hardened steel and carbide by electrical discharge with an electrode, in moulds, dies and tooling.
Key strengths
ONA is a Spanish manufacturer of EDM machines. On this unit, the ONA Program 30 control cabinet houses the X, Y and Z axis readout and the erosion controls.
Configuration of this unit
Make and model: ONA B-230
Type: die-sinking EDM
Control: ONA Program 30 with X, Y, Z axis readout
Drive: semi-control, according to our data sheet
Travels: X 200 mm, Y 300 mm
Tank: 700 x 500 x 295 mm
Separate control cabinet next to the machine
Typical applications
Production and repair of moulds, blanking dies, press tools and tooling in hard materials, and machining of shapes that cannot be produced by conventional milling.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
ONA B-230 die-sinking EDM machine with ONA Program 30 control. It is used to machine cavities and shapes in hardened steel and carbide by electrical discharge with an electrode, in moulds, dies and tooling.
Key strengths
ONA is a Spanish manufacturer of EDM machines. On this unit, the ONA Program 30 control cabinet houses the X, Y and Z axis readout and the erosion controls.
Configuration of this unit
Make and model: ONA B-230
Type: die-sinking EDM
Control: ONA Program 30 with X, Y, Z axis readout
Drive: semi-control, according to our data sheet
Travels: X 200 mm, Y 300 mm
Tank: 700 x 500 x 295 mm
Separate control cabinet next to the machine
Typical applications
Production and repair of moulds, blanking dies, press tools and tooling in hard materials, and machining of shapes that cannot be produced by conventional milling.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/edm-machine-ona-b-230-program
