









ECKOLD - WT 150 X
Technical specification
| Category | Accessories |
| Make | ECKOLD |
| Model | WT 150 X |
| Year | 2016 |
| Condition | Used |
| Location | Babberich, Netherlands |
Description
- Reforming Tool type WT/NFW
- Diameter 150 mm
- Weight 16.9 Kg
- Steel 400 N/mm2 = 6,0 mm
- Inox 600 N/mm2 = 6,0 mm
- Aluminium 250 N/mm2 = 6,0 mm
- For finish forming and calibrating of preformed components.
- It consists of a tool carrier WT 80 S and forming inserts N NFW 102
- The forming inserts NFW in steel quality are designed for
one single radius and one single thickness of material only.
- Different forming inserts can be put into the same
tool carrier WT 80 S.
- But with one set of forming inserts only one single radius in one single thickness of material can be reformed.
Inserts are available different shapes
- Diameter 150 mm
- Weight 16.9 Kg
- Steel 400 N/mm2 = 6,0 mm
- Inox 600 N/mm2 = 6,0 mm
- Aluminium 250 N/mm2 = 6,0 mm
- For finish forming and calibrating of preformed components.
- It consists of a tool carrier WT 80 S and forming inserts N NFW 102
- The forming inserts NFW in steel quality are designed for
one single radius and one single thickness of material only.
- Different forming inserts can be put into the same
tool carrier WT 80 S.
- But with one set of forming inserts only one single radius in one single thickness of material can be reformed.
Inserts are available different shapes
Imported from the Mach4Metal BV stock feed (https://mach4metal.com/exports/eamtm-stock-feed.xml). Source listing: https://mach4metal.com/en/eckold-kraftformers/eckold-tooling/eckold-wt-150-x-2
