








Drilling machine tapping machine type P-10 (FEHLMANN)
Technical specification
| Category | Drilling |
| Condition | Used |
| Location | Switzerland |
| Type | P-10 |
Description
Origin of manufacture Napoleon
Voltage 400V
Approx. 700x450x900 mm
Net weight machine approx. 150 kg
Customs Tariff 8459.2930
TECHNICAL CHARACTERISTICS (standard)
Drilling capacity in steel 10 mm
Taraudage in steel until M8
travel of the spindle drilling 80 mm
Horizontal swan collar 210 mm
spindle nose distance to base plate 125 – 455 Naturally executed
195 – 525 mm with raised column
for mounting a coordinate table
base plate clamping surface 265 x 230 mm
Z Eventually, 10 – H8 mm
9 speeds from spindle 275 to 10 (000, min-1)
3 engine speeds 730 / 1480 / 2950 min-1
Power drive 0,2 / 0,5 / 0,6 kW
If there is any error or omission, the technical information is given to you without obligation.
Voltage 400V
Approx. 700x450x900 mm
Net weight machine approx. 150 kg
Customs Tariff 8459.2930
TECHNICAL CHARACTERISTICS (standard)
Drilling capacity in steel 10 mm
Taraudage in steel until M8
travel of the spindle drilling 80 mm
Horizontal swan collar 210 mm
spindle nose distance to base plate 125 – 455 Naturally executed
195 – 525 mm with raised column
for mounting a coordinate table
base plate clamping surface 265 x 230 mm
Z Eventually, 10 – H8 mm
9 speeds from spindle 275 to 10 (000, min-1)
3 engine speeds 730 / 1480 / 2950 min-1
Power drive 0,2 / 0,5 / 0,6 kW
If there is any error or omission, the technical information is given to you without obligation.
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/perceuse-taraudeuse-fehlmann-type-p-10/
